Welding Cadweld Graphite Mould With Competitive Price

Welding Cadweld Graphite Mould With Competitive Price

40.0 USD

Min. Order:	1 Set/Sets
Trade Term:	FOB
Payment Terms:	Paypal, L/C, D/P, D/A, T/T, WU, Money Gram
Supply Ability:	10000/month
Place of Origin:	Zhejiang

Company Profile

XINCHANG SHIBANG NEW MATERIAL CO., LTD.

Location:	Shaoxing, Zhejiang, China (Mainland)
Business Type:	Manufacturer, Service
Main Products:	High Quality Solid Copper Wire, Copper Coated Steel Ground Rods, Copper Bonded Ground Rod, Copper Plated Earth Rod, Copper Clad Steel Earth Rod

Product Detail

Model No.:	AF-J0610
Means of Transport:	Ocean, Air, Land
Item:	Welding Cadweld Graphite Mould
Material:	Graphite
Shaping Mode:	Die Casting
Size:	Custom made
Service times:	50-100 times
Certification:	Assessed by CEPRI
Production Capacity:	10000/month
Packing:	Carton+Pallet
Delivery Date:	20 days

Show

Product Description

Welding Cadweld Graphite Mould

1.System containing: Graphite mold, Flint gun, heat resistant glove, Fastening clamp, Metal disc, Powder, Steel brush, Banister brush, etc.

2.Mold material: Graphite. Ensure the high temperature resistance.

3.Cost-effective, no extra power required makes it portable.

4.Easy to operate, no special skills required.

5.Durable mold, can be used 50-100 times.

6.Creates high quality electrical connection, high corrosion resistance, high conductivity.

Main content and ratio of welding powder

Element	Ratio Wt/%
Cu	≥76.0
Al	≤2.0
Fe	≤10.0

Physical properties of joint

Properties	Technology index
Conductivity	Resistance of conductor (Including joint) should be less than that of same length base metal
Strength	Joint strength should not less than 95% of low limit of raw material's strength (CCS material is regarded as pure copper )
High melting point	≥1 083 ℃
Surface	No air hole ,residue and crack
Section quality	The max size anywhither should be higher than 1/3 of the thickness(or 1/4 of diameter) ,but should be less than 3mm

Resistance of joint

Resistance /μΩ	Test location
113	Distance between tested location :15 cm

Strength of joint

Strength Rm/MPa	Remark
340	No crack and base metal off

PRODUCTS PHOTOS

Operation Flow

Operation Instruction

Check to ensure the graphite mold and conductor is clean ,no residue before making the connection
Use a propane torch to dry wire conductors and remove remaining cleaning residue, solvent, or water before making the connection.
Close the graphite mold lid before ignition ,and close the lid tightly
Insert the conductors and position them for the connection.Ensure them in the center of cavity.
Keep the irrelevant personnel 1.5M away when welding
Keep the inflammable goods 1-2M away when welding
The operator must be equipped thermal barrier glove
Don't face to the mould opening when welding
The operator keep 1.5M away mould is must after ignition
Don't touch the mould and connected parts directly after welding
Open the mould and take the joint out with wrench 10-20S later after reaction .
Insulate the joint after the conductor cooling completely .

Notes:

1.Avoid contacting of hot molten metals with water, oil, grease, etc. It may cause excessive

spatter and burns.

2. Do not uses in flammable vapors or dust, a fire or explosion may happen.

3. void fire, mould must be stored in dry, well-ventilated area, away from open flame and excessive heat.

4. Avoid looking directly at the light of the reaction. It may irritate your eyes.

5. Wear safety glasses and leather gloves to use the mould.

Exothermic Welding Joints

Join any of below materials: Copper; Steel; Bronze; Brass; Commercial iron; Copper clad rod; Stainless iron; Wrought iron.

Packing

Strong packing is available and free of charge ,which is suitable for loading, storage in most popular condition .Custom packing will be charged reasonably to favor customer's requirement .

Mould Packing: Air buddle film packing and carton, the additional wooden carton or wooden pallet protect the mould from broken when transportation.

Exothermic welding powder packing:PE bag indicating model, and the pyrophoric powder ,aluminium gasket contained. The additional carton box and wooden pallet protect the material.

Quality Control

1.IQC (Incoming check )

2.IPQC (Process quallity control )

3.First Piece quality control

4.Mass products quality control

5.OQC (Outgoing quality control)

6.FQC (Final Quality Check)

Certifications