8-0108-0003-ISO Emerson Turbidity Meter Sensor
2. Sensor technical specifications (8-0108-0003-ISO replaceable sensors in accordance with international ISO standards)
Environmental standards: US EPA180.1 or international ISO 7027 [using 860nm LED light source) must be explained when ordering
Incandescent lamp life: about 2 years
LED life: about 5 years
Dimensions: about 5.2 inches X 3.0 inches (diameter) [132 mm * 76 mm)
Material in contact with the process liquid: Delrin, glass, EPD
Accuracy after calibration with 20NTU calibration cup:
0-1 NTU, ±2% of reading or ±0,015 NTU, taking a larger value;
0-20 NTU, ±2% of reading
Cable length: 20 feet (6.1 meters) or 50 feet (15.2 meters), up to 50 feet [15.2 meters) cable connector protection class IP65
Final pressure: 30psig (308KPA, absolute pressure)
Temperature: 3-35 ° C
Protection level : IP65
Bubble flow cell specifications
Dimensions: 18.1 inches (460 mm) long, 4.1 inches (104 mm)
Material in contact with process liquid: ABS, EPDM, Delrin, polypropylene, nylon
Inlet size: 1/4" (OD) ferrule connector, you can also remove the connector to become 1/4" FNPT
Discharge port size: The spine connector is connected to the 3/8" (ID) line, and the connector can also be removed to become a 1/4" FNPT. The discharge port must be straight out of the atmosphere
Sampling temperature: 40-95 °F (5-35 ° C)
Minimum sampling pressure: 3.5 psig (125KPA, absolute pressure), at which point the sample flow rate is approximately 250 ml / hour
Maximum sampling pressure: 30psig (308KPA, absolute pressure) discharge pipe can not be blocked
Recommended sampling flow: 250-750 ml / min
Weight / Shipping Weight: Sensor: 1 lb / 2 lb [0.5 kg / 1.0 kg)
Analyzer: 2 lbs / 3 lbs [1.0 kg / 1.5 kg)
