4~20mA Industrial Pressure Transmitter
PB8100 series to choose high precision, high stability and high reliability of diffusion silicon pressure sensor and imported top quality integrated circuits, the product of high precision, good stability, high reliability, impact resistance, can completely replace the imported high grade pressure transmitter, especially suitable for measuring or measurement occasions with relatively high requirements.According to the need, can provide the Ann type, flameproof explosion-proof products.
FEATURES:
| ● Wide range: |
| - 0.1 ~ 60 mpa;The minimum range range: 0 ~ 5 kpa |
| Or 0 ~ 0.5 m or above level |
| ● Low zero, adjustable range |
| ● Low with reverse polarity protection and current limiting protection |
| ● Lightning protection, radio frequency interference resistance ability |
| ● Low wider practicability, easy installation |
| ● Low and high precision, high stability, high reliability |
| ● Low with explosion-proof properties |
| ● Low IP65, protection grade suitable for outdoor installation |
| ● Low power supply, output, two wire |
| ● Applicable to occasions with higher requirements, comply with the requirement of measurement standard |
| ● Low unique design makes the water hammer shock performance is good |
| ● Low service life is long |
| ● According to the special requirements, can make its good freezing resistance |
| ● Low HART protocol can be customized |
Application:
| ● The industrial field process pressure control |
| ● The aerospace field |
| ● The petroleum chemical industry |
| ● Light industry machinery, medical equipment |
| ● Marine shipbuilding industry |
| ● Water conservancy and hydropower plants, constant pressure water supply |
| ● Other automatic control and detection system |
Datasheet:
| ● Accuracy: 0.25%FS,0.5%FS |
| ● Measuring range: -1...0...600bar |
| ● Power supply: 24VDC(12 to 36 VDC) |
| ● Output: 4-20mA(0-5V,1-5V,0-10V,0-10mA) |
| ● Overload: 150%FS |
| ● Burst pressure: 300% |
| ● Protection: IP65 |
| ● Operating temp: -20 to +85 deg C |
| ● Sroring temp: -40 to +125 deg C |
| ● Process connection: G1/2(1/2BSP), 1/2NPT, G1/4,1/4NPT,3/8(customized) |
| ● Wetted parts: 304 stainless steel |
| ● Diaphragm material: 316SS |
| ● Weight: about 750g |
| ● Enclosure protection:IP65 |
