Cartridge valve control flow or pressure

Cartridge valve control flow or pressure

A  cartridge valve inserts the active element into the standard cavity of the manifold block and the cartridge is held in place by the passive block (the cover). It avoids the great deal of piping between the elements and actually eliminates any potential leakages and the consequential fluid waste.

Cartridge valve merits

    Flexible system design; Low-cost installation; Small size; Improved performance, control and reliability; Higher pressure capacity; Better efficiency; Eliminated external leakage, reduced internal leakage; Better contaminant resistance; Faster cycles.

Structure

    A cartridge valve is very much like a seated check valve and includes a plug assembly (cartridge) that slips into the cavity of themanifold block. The cavity is built per ISO7380. The plug is held in the cavity by the cover that is bolted onto the manifold block. THE cartridge is composed of the casing, the core, the spring and the seal. The cavity block holes connect the main passages A and B of the cartridge to other cartridges or working hydraulic systems. In 
the same principle, the cavity block holes connects the control passages X, Z1 and Z2 as necessary in accordance with arrangements in ISO7368.
    The control cover can also include a manual controller to limit core travel and flow rate. Various damping holes are provided so as to assist overall hydraulic system optimization or adjust the response of the cartridge valve. Some covers may also have an ISO4401 03 or 05 mounting face to make it possible to install the pilot-operated directional (or pressure) control valve as a whole piece. Adding control modules between pilot valves and the cover will extend control functions.

Technical specification

Valve core area ratio
A cartridge valve is just a 2-way valve that closes flow, allows free flow, or control flow or pressure. Basically the cartridge includes a casing, a spring and a core and has 3 cross section areas marked as AA, AB, and AX which affect the core's opening or closing against the seat. The area for Passage A is the area of the circle determined by seat diameter, while for B it is the circumferential area between the seat and the core and AX is the area of the circle with the core's diameter. Pressure on AX and the spring holds the core against the seat.

Cover symbols

3.Packaging & Shipping

• Inner packing: opp bag, then carton box for each product

• Outer packing: export standard carton, Foam outside protecting the goods against damage

• Usually we ship your order by sea or by air...

• We do our best to ship your order within 1 week after receiving your payment

• We'll tell you the tracking number once your order has been sent

• We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal






4.About us

1: Various style for each products and completely series pneumatic products for you to choose from.
2: Large stock for fast shipping.
3: High quality with competitive price
4: Sample order & small quantity order is ok

5:Customize according to your special demand.
6: Provide free products information.
7. Reliable quality assured and active after-sell service

Feel free to contact us at anytime if you have any problems or questions on your purchase. 

We will resolve any problems such as damaged, not as described, missing parts, and lost items. 

All emails will be replied within 24 hours except Saturday. & Sunday and Chinese holidays. 

If you have any other requirements or questions, welcome to visit our website, or just contact 

with us directly. Thank you!