| SPECIFICATIONS |
| OGC-12(16)24 |
| Capacity | Swing Over Table | Ø320 mm (Ø420 mm) |
| Distance Between Centers | 600 mm |
| Max. Grinding Diameter | Ø300 mm (400 mm) |
| Max. Load Held Between Centers | 150 kg |
| Wheel | OD x Width x ID | Ø405 x 50 xØ127mm |
| Linear Velocity | 30 m/s |
| Speed | 1783rpm |
| Wheelhead | Rapid Feedrate | 6m/min |
| Min. Input Increment | 0.001 mm(0.0001 mm) |
| Inemal Grinding | Manual Elevation |
| Table | Rapid Feedrate | 6m/min |
| Min. Input Increment | 0.001 mm(0.0001 mm) |
| Swiveling Angle | 0° ~ 12° |
| Workhead | Swiveling Angle | -30°~+90° deg |
| Center | MT. No. 4 |
| Speed | 10-300rpm |
| Max. Load of Spindle(tool holder included) | 35kg(Max. Length:150 mm) |
| Tailstock | Center | MT. No. 4 |
| Tailstock Stroke | 25 mm |
| Power Source | Fanuc System | Power :220V Cont. Cir.24VDC |
| Drive Motors | Wheel spindle | 3.7(4P) kw |
| Work Spindle | 0.8 kw (AC Servo motor) |
| Wheelhead Feed | 1.2kw (AC Servo motor) |
| Table Feed | 1.8kw (AC Servo motor) |
| Hydraulic Pump | 0.75(6P)kw |
| Wheel Spindle Lubricant | 0.18(2P)kw |
| Coolant Pump | 0.18(4P)kw |
| Inemal Grinding Wheel Spindle | 0.75(2P)kw |
| Tank Capacties | Wheel Spindle Bearing Lubricant | 18L |
| Lubrication Oil Tank | 60L |
| Machine Weight | 3600 kg |
