| SPECIFICATIONS |
| OGC-816 |
| Capacity | Swing Over Table | Ø200 mm |
| Distance Between Centers | 400 mm |
| Max. Grinding Diameter | Ø180 mm |
| Max. Load Held Between Centers | 60 kg |
| Wheel | OD x Width x ID | Ø355 x 38 x Ø127 mm |
| Linear Velocity | 30 m/s |
| Speed | 2085 rpm |
| Wheelhead | Rapid Feedrate | 6 m/min |
| Min. Input Increment | 0.001 mm (0.0001 mm) |
| Inemal Grinding | Manual Elevation |
| Table | Rapid Feedrate | 6 m/min |
| Min. Input Increment | 0.001 mm (0.0001 mm) |
| Swiveling Angle | -3°~10° |
| Workhead | Swiveling Angle | -30° ~ +90° deg |
| Center | MT. No. 3 |
| Speed | 10 - 300 rpm |
| Max. Load of Spindle(tool holder included) | 15 kg (Max. Length:100 mm) |
| Tailstock | Center | MT. No. 3 |
| Tailstock Stroke | 20 mm |
| Power Source | Fanuc System | Power : : 220V Cont. Cir.24VDC |
| Drive Motors | Wheel spindle | 2.3(4P) kw |
| Work Spindle | 0.75(4P) kw(Freq. Invt.) |
| Wheelhead Feed | 1.2 kw (AC Servo motor) |
| Table Feed | 1.2 kw (AC Servo motor) |
| Hydraulic Pump | 0.75(6P) kw |
| Wheel Spindle Lubricant | 0.18(2P) kw |
| Coolant Pump | 0.18(4P) kw |
| Inemal Grinding Wheel Spindle | 0.375(2P) kw |
| Tank Capacties | Wheel Spindle Bearing Lubricant | 12 L |
| Lubrication Oil Tank | 60 L |
| Machine Weight | 2350 kg |
