Japan Type Four Ways Quick Coupler

Japan Type Four Ways Quick Coupling

Pneumatic quick connector is a major piping for air, pneumatic tools, quick connector, no tools will be able to achieve piping connected or disconnected joints.

***Air Quick Connector:

The main air line for quick installation, pneumatic tools fittings. Corresponds

to its use, there is a rich and diverse body of material, size and installation of various shapes. 

Caution: 

Please do not used for purposes other than fluid. 

Please do not apply for fluid flow outside. 

Do not exceed the maximum working pressure during use. 

Do not use beyond the temperature range to prevent deformation of the sealing material is caused, easily lead to the formation of leaks. 

Do not hit the man, bending, stretching, to prevent causing damage. 

Do not mixed with metal powder or sand and dust and other places, you can use the quick connector can be used here in a very bad condition, and to ensure a long service life. 

Such as attachment or debris will cause leakage of the working poor. 

Do not remove the quick connector.

***Gas type quick connector:

Primarily used for general purpose fuse pipe having a large flow, durability, corrosion resistance characteristics. The main material, size and shape of a rich and diverse installation. 

Caution: 

Caveat 

Fluid must flow from the sleeve side of the plug side. 

Please use the controls Threaded Male sealing material. 

When mounting thread, do not exceed the maximum tightening torque, to prevent causing damage. 

Please do not use for purposes other than a rapid fluid connector. 

Please do not apply for fluid flow outside. 

Please do not with other companies producing quick connect fluid fittings. 

Do not exceed the maximum working pressure limit use. 

Do not use outside the operating temperature range, causing the sealing material to prevent wear or leakage. 

Do not hit the man, bending, stretching, to prevent causing damage. 

Do not mixed with metal powder or sand and dust and other places, to prevent adverse or leaks work. 

Such as attachment or debris will cause leakage of the working poor. 

Please do not use local gas retention. 

When a fire nearby, please do not make loading and unloading operations. 

When produce tempered, replace with new products. 

When installing the hose, never stained with oil to prevent the causing of natural fire. 

When installing the hose again, the end of the hose is greater than 3 cm from the cut. 

Pay attention 

Please do not use for purposes other than a rapid fluid connector. 

The roots of the hose firmly into the connector, belt or hose nut. 

To prevent moisture possession, should be kept indoors. 

Do not use a cracked hose, causing leakage and loss prevention. 

Leak check should be carried out before use, when there is a leak, you should immediately stop using and replace it with new products. 

Should confirm that the gas torch valve is closed before connecting. 

After welding used for a period of time to pay attention, to conduct joint and pipeline safety checks to see if there is an air leak.