user login

Super Safety Valve Drill Stem Testing

500.0 USD
Min. Order: 1 Piece/Pieces
Trade Term: FOB
Payment Terms: T/T
Supply Ability: 2 pcs/month
Place of Origin: Shaanxi

Company Profile

Location: Xi'an, Shaanxi, China (Mainland)
Business Type: Manufacturer, Distributor/Wholesaler, Service

Product Detail

Model No.: TOP -SSV-04
Means of Transport: Ocean
Application: oil well testing
Type: full bore drill stem testing
working pressure: 15000psi
service: H2S
standard: NACE MR0175
Condition: New
Processed type: Forging
Parts: control panel
Usage: surface testing
Material: Inconnel
Production Capacity: 2 pcs/month
Packing: polywood case
Delivery Date: 15~30 days
Show

Product Description

Super safety valve

Drill stem testing tools


The Super Safety Valve is controlled by two hydraulic lines and contains a chemical injection port.  It is designed to close by spring force but has a nitrogen charge chamber to quicken the closing time.  This feature gives the valve the ability to cut wireline and coiled tubing without the addition of balance line pressure.  The valve is held open by maintaining hydraulic control pressure on the control line.  The nitrogen charge chamber and the balance line chamber are the same chamber.  The nitrogen pressure acts directly on the operating piston and a floating check valve keeps the nitrogen from escaping from the chamber into the balance line.  The check valve floats on the surface of the water (or hydraulic fluid) as fluid is pumped into the chamber. When the fluid is removed, the floating check valve sets down on the seat and seals the nitrogen charge in the chamber.


The Super Safety valve (SSV) is a master valve used for testing operations from jack-up or land rigs. The SSV is installed in the test string so that a BOP ram can be closed on the ram lock sub located in the top section of the valve. The annulus is then protected by the BOP rams, and the test string is protected by the safety valve. The Super Safety valve is capable of cutting wireline and 1.5-in. coiled tubing. If equipped with a cutter ball, it is capable of cutting 2-in. OD, .125-in. wall coiled tubing using a nitrogen dome charge or by applying balance line pressure


Specification

overalllength w/handing sub142.65"
valve section length50.90"
ramlock:5.0" OD x 18.0" LONG
valve bodyOD8.0"
handing subOD8.16"

Hydraulic console panel


ZZ TOP OIL TOOLS is the professional manufacturer for the drill stem testing tools and surface testing equipment. All the DST tools are conformed with NACE MR 0175 with traceability,and the DST tools can be worked in H2S & CO2 above 175 F and full H2S, also with the skilled and experienced engineers, we can design the drill stem testing tools as per customer's well condition. Moreover, we supply the training in our factory and operation instruction at the well site. The DST tools are exported to USA, Colombia, India, Pakistan, Iran, Brazil etc. and enjoy the good reputation from the customers.

To shorten the delivery time, we proceeded the DST Tools in stock:

Packer,circualting valve,select tester valve,APR N-valve,OMNI valve,Hydraulic Jar,Tubing string tester

1. Full bore Packer, 7" Casing, working pressure 70Mpa, Working Temperature 400F, Connection: IF, 4set

2. Tester valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4 sets

3. Hydraulic Jar,5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets

4. Rupture disk Circulating valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets

5. Flowhead (surface test tree), 3 1/16", working pressure 70 Mpa. 1set

Should you have any interest or inquiry on the Drill stem testing tools, contact us freely.


Post Buying Request