HK12×17×15 Needle roller bearings

Min. Order:	1000 Piece/Pieces
Payment Terms:	L/C, T/T, WU
Supply Ability:	300000 Piece/Pieces per Month
Place of Origin:	Zhejiang

Needle roller bearings, drawn cup HK12×17×15

Demension: 12×17×15mm ,   

SHAPE LOCATION TOLERANCE SHOULD BE TO CURRENT STANDARD;

Outer ring fordrawncup needle roller bearings(DC type) is made of cold rolled steel strip accurately formed.Structure of DC needle roller bearings features space saving and higher capacity.They are suitable for applications with limited space and housing not hard enough to act as raceway. No requirement on axial location when the DC needle roller bearing is pressed into the housing.

In most applications inner ring is not necessary for DC needle roller bearings unless shaft raceway is impractical,standard inner rings for DC to compare with open end DC needle roller bearings, close end DC needle roller bearings are good for sealing at the close end of bearings,operating temperature range for bearings grease lubricatedare 20℃ to +120℃.

Needle roller bearings, drawn cup HK12×17×15

1. Structures of various series of drawn cupneedlerollers
     Metricseries: HK, BK, F, FH, FY, MF, MFH,MFY
     Inch series: SCE, BCE, SCH, BCH,SN, B, BH, M, MH
     HK: Caged, with open ends
     BK: Caged, with open ends
     F : Full complement, with open ends
     FH : Full complement,withopenends(Heavy series)
     FY : Full complement, grease retained,withopenends
     MF : Full complement, with closed ends
     MFH:Fullcomplement, with closed ends(heavy series)
     MFY: Fullcomplement,withclosed ends
     SCE: Caged, with open ends
     BCE:Caged, withclosedends
     SCH: Caged, with open ends(heavy series)
     BCH: Caged,withclosed ends(heavy series)
     SN   : Full complement, greaseretained,withopen ends
     B    : Full complement, with open ends
     BH   :Fullcomplement, with open ends(heavy series)
     M    : Fullcomplement,withclosed ends
     M H: Full complement, with closedends(heavyseries)
2. Inspection the enveloping circle diameter
    The dimensional accuracy of drawn cup needle roller bearings cannot be measured before fitting
    without a ring gauge as the thin-walled outer ring can be out of round due to the manufacturing process.
    The bearings obtain the accuracy required for their correct function only when pressed into ahousing
     bore which must be manufactured with the recommended tolerance limits.
     The enveloping circle diameter can then be checked as follows:
a.   Press the bearing into a steel ring gauge(wall thickness≥20mm).The bore dimension of the ring
        gauge must correspond to that given.
b.   Measure the enveloping circle diameter with cylindrical go and no-go gauge plugs.

ShaftDia.	Part Number		Dimension			BasicLoad Rating		Limiting Speed	Weight
			Fw	D	C	Dynamic	Static	Oil
mm			mm			N		RPM	g
3	HK0306TN	BK0306TN	3	6.5	6	1230	840	48000	0.3
4	HK0408	BK0408	4	8	8	1780	1310	42500	1.6
5	HK0509	BK0509	5	9	9	2400	1990	39000	2
6	HK0606	--	6	10	6	1610	1220	36500	1.5
	HK0608	--	6	10	8	2030	1650	36500	2.1
	HK0609	BK0609	6	10	9	2850	2600	36500	2.2
7	HK0709	BK0709	7	11	9	3100	2950	33000	2.6
8	HK0808	BK0808	8	12	8	2750	2600	29500	2.7
	HK0810	BK0810	8	12	10	3800	3950	29500	3
9	HK0908	--	9	13	8	3550	3750	26500	3
	HK0910	BK0910	9	13	10	4250	4650	26500	4
	HK0912	BK0912	9	13	12	5300	6300	26500	4.6
10	HK1010	BK1010	10	14	10	4400	5100	24300	4.1
	HK1012	BK1012	10	14	12	5500	6800	24300	4.8
	HK1015	BK1015	10	14	15	6800	8800	24300	6
12	HK1210	BK1210	12	16	10	4950	6200	20700	4.6
	HK1212	BK1212	12	18	12	6500	7300	20000	9
13	HK1312	BK1312	13	19	12	6800	7900	18700	10
14	HK1412	BK1412	14	20	12	7100	8500	17500	10.5
15	HK1512	BK1512	15	21	12	7900	9400	16300	11
	HK1516	BK1516	15	21	16	10500	14400	16500	15
	HK1522-ZW	--	15	21	22	13400	19500	16500	20
16	HK1612	BK1612	16	22	12	7600	9700	15600	12
	HK1616	BK1616	16	22	16	10900	15300	15600	16
	HK1622-ZW	BK1622-ZW	16	22	22	13100	19400	15600	22
17	HK1712	--	17	23	12	7900	10300	14700	12
18	HK1812	BK1812	18	24	12	7500	10500	14000	13.1
	HK1816	BK1816	18	24	16	10600	15300	14000	17.5
20	HK2010	--	20	26	10	6400	8200	12700	12
	HK2012	--	20	26	12	8600	12100	12700	14
	HK2016	BK2016	20	26	16	12700	20100	12700	19
	HK2020	BK2020	20	26	20	15700	26000	12700	24
	HK2030-ZW	--	20	26	30	21800	40000	12700	35
22	HK2210	--	22	28	10	7200	10500	11700	13
	HK2212	BK2212	22	28	12	9100	13400	11700	15
	HK2216	BK2216	22	28	16	13400	22100	11700	21
	HK2220	--	22	28	20	16500	29000	11700	26
25	HK2512	--	25	32	12	11000	15200	10200	20
	HK2516	BK2516	25	32	16	15600	24000	10200	27
	HK2520	BK2520	25	32	20	19900	33000	10200	33
	HK2526	BK2526	25	32	26	25500	45000	10200	44
	HK2538 ZW	BK2538ZW	25	32	38	34000	66000	10200	64
28	HK2816	--	28	35	16	16400	26500	9200	29
	HK2820	--	28	35	20	16400	36000	9200	36
30	HK3012	BK3012	30	37	12	12100	18200	8600	23
	HK3016	BK3016	30	37	16	17200	29000	8600	31
	HK3020	BK3020	30	37	20	22000	39500	8600	39
	HK3022	--	30	37	22	24800	46000	8600	42
	HK3026	BK3026	30	37	26	28000	54000	8600	51
	HK3038-ZW	BK3038-ZW	30	37	38	37500	79000	8600	76
32	HK3220	--	32	39	20	23000	42500	8100	40.6
	HK3224	--	32	39	24	27500	54000	8100	49
35	HK3512	--	35	42	12	13100	21300	7500	27
	HK3516	--	35	42	16	18700	33500	7500	36
	HK3520	BK3520	35	42	20	23800	46000	7500	44
40	HK4012	--	40	47	12	14000	24300	6600	30
	HK4016	--	40	47	16	20000	38500	6600	39
	HK4020	BK4020	40	47	20	25500	52000	6600	54
45	HK4512	--	45	52	12	14900	27500	5900	33
	HK4516	--	45	52	16	21300	43000	5900	46
	HK4520	BK4520	45	52	20	27000	59000	5900	56
50	HK5020	--	50	58	20	31000	63000	5300	70
	HK5025	--	50	58	25	38500	84000	5300	90
55	HK5520	--	55	63	20	31500	67000	4850	74
	HK5528	--	55	63	28	44000	103000	4850	105
60	HK6012	--	60	68	12	17400	32000	4450	49
	HK6020	--	60	68	20	33500	75000	4450	81
	HK6032	--	60	68	32	53000	135000	4450	136

Needle roller bearings, drawn cup HK12×17×15