automatic light steel keel forming machine

Min. Order:	1 Set/Sets
Payment Terms:	L/C, T/T
Place of Origin:	Hebei

Company Profile

Nanpi Huatong Machine Factory

Location:	Cangzhou, Hebei, China (Mainland)
Business Type:	Manufacturer

Product Detail

Model No.:	HT light steel keel forming machine
Type of machine:	Colored steel tile(panel) forming machine
Delivery Date:	30 days after receipt of the advance deposit

Product Description

TECHNICAL SCHEME

1. Name of production line:

HT colored light steel keel forming machine

2. Production flow chart:

Decoiling--- Colored steel coil feeding---Roll forming---Cut to length---Final product

1) Un-coiler (Optional devices)

2) Feeding device

3)Roll-forming device

4)Hydraulic cutter

5)PLC control system

6) Hydraulic station

7)Stacker (Optional devices)

3.Technical specification of every parts of machine line : ( Photos just for reference )

1)un-coiler(Optional devices):

(1)To support and uncoil the steel coil, tenses the coil, it is convenient to

operate. The coil inner diameter: φ -550mm, Max outer coil diameter:

φ1000mm-1250mm, The capacity: 3T-10T

(2)Optional type:

<1>Manual un-coiler

<2>Electric un-coiler

<3>Hydraulic un-coiler

2)Feeding device :

Help to adjust and feed the colored steel coil to the roll forming device.

3)Roll forming device :

(1)Profile drawing of product produced by this type of machine

(2)Picture of roll forming device

(3)Parameters of roll forming device:

<1>Roll Forming rollers: material GCr15, hardness after heat treatment HRC48-50,

<2>Hole diameter (roller shaft diameter) φ42mm, the min. outside diameter of rollers isφ100.

<3>Main motor (Jiangmen Jiangyan motor), Frequency control.

<4>The material of main shaft is 40Cr, finished after heat treatment and refine grinded.

<5>Hydraulic system: Taiwan Dazheng brand.

<6>Mould rack: the mould plate closed height is 260mm, the adjustment range of the closed height is 20mm, the max. stroke of oil cylinder is 100mm.

<7>Total power: 12kw

<8>Power supply: voltage 380V±10%/ three phase four wire, frequency 50HZ.

<9>. PLC : DELTA(TAIWAN)or Mitsubishi(JAPAN)

<10>. Frequency converter : DELTA(TAIWAN)

4)Hydraulic Cutter

Hydraulic cutting

Post cut, stop to cut,

The cutting blade material is Cr12,

The cutting tolerance: ±2.0mm

5)PLC control system :

PLC control the whole line.

Human-machine interface, whirl encoder calculates the length, touch screen sets the length. You can set lots of data one time. Frequency adjusts speed, it has auto adjustment function. Transducer drives the main machine, it has E-stop button, which to insure safe running.

6)Hydraulic station :