MH type single beam door crane
1.0 USD
| Min. Order: | 1 Set/Sets |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | T/T |
| Place of Origin: | Jiangsu |
Company Profile
| Location: | China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Means of Transport: | Ocean |
|---|---|
| Brand Name: | Baichuan |
| Packing: | According to client's requirements |
| Delivery Date: | in 30 days |
Product Description
Technical Description
Design and construction rules:
All the standard which is required for the crane is the Chinese standard.
The China main national standards
Design rules for cranes GB 3811-83
Safety rules for lifting appliances GB 6067-85
Common crane technical condition GB 7592-87
Crane-Overhead travelling crane and portal bridge crane tolerances for manufacture and tracks laying GB 10183-88
Crane-test code and procedures GB 5905-86
General Bridge Crane GB/T 14405-1993
Portal Crane GB/T 14406-1993
Crane & Lift Equipment
Technical Performance and Acceptance Condition GB/T 17908-1999
Electrical installation and acceptation standard GBJ232-82
Safety of machinery-Electrical equipment of machines
Part 32:Requirements for hoisting machines GB5226.2-2002
Electrical installation and acceptance standard GB 50256-96
Crane girders
The crane girders are of welded girder construction. This result in lower dead weights with a high degree of vertical and horizontal rigidity and smaller wheel loads being transmitted to the crane runway.
Electrical and Control Equipment
The crane that we are offering is designed to meet the required functions and requirement stated in your specifications, as well as for the operating conditions.
The sub-assemblies used by are standardized equipment of renowned manufactures and have been approved for specific crane operation by our test laboratory. Their characteristics regarding impact/vibrations, wear and safety were examined. A continuous high quality standard is ensured by series production and standardized sub-assemblies.
The electrical equipment is accommodated in robust steel plate control cubicles, on the crane girder.
All movements can be switched off by actuating the emergency-off switch at the control station via a main contactor.
The entire equipment is easy to install and dismantle due to the use of threaded bolts and top-hat rails
Cable inlet from cable gland
Power supply cable and control cable along the girder
A protective earth conductor is fitted as standard. A crane switch is provided.
Travel end switches
Long and cross travel limited by means of preliminary and final limit switches
Overload protection: In the event of overload, the hoist unit switches off and only the lowering motion is possible.
The Service Documentation
The documents enclosed with this quotation serve as a basis for understanding, planning and
illustration.
With the delivery, you will receive the following documents for your reference unless otherwise agreed:
General layout drawing of the installation (drawing for approval)
Operating instructions
Maintenance instructions
Assembly instruction for main current supply line (if relevant)
These documents are provided in English language
