Molybdenum Wire for EDM Machine

Molybdenum wire for EDM Machine has high tensile strength, good stability, good electric discharge, low elongation, high wire diameter consistent. Molybdenum wire for EDM Machine is not easy to break and has long servicing life. Molybdenum wire EDM Machine can the cut metals in smooth finish, high EDM Machine speed, and high precision. The wire is vacuum packed in order to prevent oxidation.

Molybdenum wire has outstanding electrical and heat-conducting capabilities and relatively high tensile strength. Thermal conductivity is approximately 50% higher than that of steel, iron or nickel alloys. It consequently finds wide usage as heat sinks. Its electrical conductivity is the highest of all refractory metals, about one third that of copper, but higher than nickel, platinum, or mercury. The coefficient of thermal expansion of molybdenum plots almost linearly with temperature over a wide range. This characteristic, in combination will raise heat-conducting capabilities, accounts for its use in bimetal thermocouples.

Before pressing new moly wire and processing, let the machine run five-ten minutes, the cutting effects will be better.

Wire Diameter:0.05mm-10.0mm, 0.002 Inch to 0.3937 Inch

Contact Supplier