CNC Brass Wire-cut EDM machine (low speed)

Features:
1) CNC brass wire-cut electrical discharge machine including DK7625P, DK7625, DK7632, DK7632A and DK7663 equipped with high quality industrial computer, high precision linear guide way and ball screw, imported AC servo system, suitable for high precision mould and components cutting. The machines are extensively used in aero-space, education training and electronic communication industries. The machines especially for precision mould cutting. 
 
Characteristics:
 
1) The structure of casting through the state-of -the-art designed, and the major parts made of high strength and wear resistance ductile cast iron. The castings are machining by "Piano type five axes CNC machining center", so the accuracy of castings can be guarantee, and achieve high speed and high accuracy machining performance.
 
2) Direct drive transmission between servo motor and ball screws steel coupling, eliminates the backlash, enhances the machine precision in ling periods of operation. The machining accuracy is guaranteed by high rigidity machine body, precision ball screw, linear guide way and imported servo system.
 
3) "C" shape stainless steel work table is mounted one-piece granite table, can guarantee the corrosion resistance, thermal deformation and ease of installation with various kinds of workpieces. 
 
4) The box structure of U-V axes device installed in Z-axis, the movement of device is controlled by high precision ball screw, linear guide way and imported AC servo motor, the strong structure increase the rigidity and enhance the control accuracy. 
 
5) wire feeding system: The feeding device use of imported magnetic clutch which enables wire tension fluctuation to be kept a minimum; Carrier device use guide tube to carrier the used wire, high reliability and wear resistance; Wire guide use of diamond wire guide enhance cutting accuracy; Flushing dielectric fluid use dielectric fluid flushing through upper and lower nozzle, improve rinsing dirt and debris, increase machining efficiency.
 
6) Dielectric fluid system and cooling unit: Control of dielectric fluid is a good matching of high pressure pump, inverter and dielectric fluid cooler, to kept the dielectric fluid at constant temperature, steady flushing pressure and high flushing pressure achieve to 18kg/cm2; The particles filtering of paper filter is 0µm; Conductivity is automatic control in pre-set range; Flushing pressure is automatic control in high and low flushing pressure; Temperature control is automatic control the dielectric fluid temperature, enhance precise cutting.

Specification:

Item	unit	DK7625P	DK7625	DK7632	DK7632A	DK7663
Work-table dimension	mm	630×400	600×400	745×510	745×510	1120×820
Work-table travel X×Y	mm	380×260	350×250	500×350	500×350	800×630
Z axis travel	mm	250	210	270	270	360
Max work piece thickness	mm	240	200	260	260	350
Travel of U.V axis	mm	80×80	70×70	70×70	70×70	100×100
Max weight of work piece	kg	500	350	700	700	1200
Diameter of wire	mm	Ф0.15-0.30	Ф0.10-0.30	Ф0.15-0.30	Ф0.15-0.30	Ф0.15-0.30
Speed of wire	m/min	1.8~12	1.8~12	1.8~12	1.8~12	1.8~12
Weight of wire roll	kg	5	5	5	5	5
Wire tension	kg	0.2~2.0	0.2~2.0	0.2~2.0	0.2~2.0	0.2~2.0
Max machining current	A	50	50	50	50	50
Max taper angle	mm	±20º/80	±15º/100	±15º/100	±15º/100	±20º/100
Max machining speed	mm2/min	≤ 210/350	≤ 210/350	≤ 210/350	≤ 210/350	≤ 210/350
Best surface finish	um	Ra≤ 0.8	Ra≤ 0.8	Ra≤ 0.8	Ra≤ 0.8	Ra≤ 0.8
Cooling method		flushing	flushing	flushing	Flushing & Submerging	flushing
Distance from table to ground	mm	900	1000	1000	1000	1010
Machine dimensions L×W×H	mm	1760×1170×1950	1495×1280×2050	1520×1570×2150	1430×1615×21600	2240×2850×2740
Machine package dimension L×W×H	mm	2000×1310×2280	1820×1660×2500	1920×1810×2590	1920×1810×2590	3260×2550×2900
Machine weight (Gross/Net)	kg	2300/2000	2310/1990	2940/2640	2940/2640	7500/6400
Dielectric fluid		pure water	pure water	pure water	pure water	pure water
Volume of container	L	400	440	440	830	440
Water purifier		Deionizer exchanger resin
Dielectric fluid filtration		Replaceable paper filter
Dimensions of container L×W×H	mm	1600×600×1720	1610×770×1750	1610×770×1750	2540×850×1800	2060×970×1750
Container package dimensions L×W×H	mm	1760×1310×1750	1840×1720×1770	1840×1720×1770	2900×1810×1900	2300×1810×1770
Weight of container (Gross/Net)	kg	460/260	760/620	760/620	1100/816	850/603
Controller type		SKDE	SKDE	SKDE	SKDE	SKDE
Controller dimensions L×W×H	mm	1380×650×1960	1380×650×1960	1380×650×1960	1380×650×1960	1380×650×1960
Controller package dimensions L×W×H	mm	1560×910×2270	1560×910×2270	1560×910×2270	1560×910×2270	1560×910×2270
Weight of controller (gross/Net)	kg	760/620	760/620	760/620	760/620	760/620

Attention:
Please use Ф0.30mmelectrode wires to cut super-thick work piece
To achieve maximum machining speed of 350mm²/mm, need to purchase additional annex and use Ф0.30mm galvanized electrode wires.

Contact Supplier