Centrifugal Spray Dryers

95%~98% water will be evaporated out right away in a shot time!!

Centrifugal Spray Dryer

Model: DS-SD-P10

Working Principle:

After electricity-heating, through air distributor on the top of drying chamber, hot air evenly come into drying chamber in a spiral way. Meanwhile, liquids pumped by srew pump was sprayed to foggy drops by high-speed centrifugal atomizer which located on top of drying chamber, and mixed with hot air. Go downward in co-current way. It's in a very short time to be dryed to powder.

Features:

** Simple operation and easy control.

** The contact parts with air/liquids using high-quality stainless steel.

** Fast drying. After atomizing, liquids in a foggy method mixed with hot air. Because it increase contact area, water of 95%~98% will be evaporated out right away. So, it takes about 5S ~ 15S to finish the drying process.

** Finished powder with characters of good evenness, fluidity and solubility.

Technical data:

** Water evaporation: 10KG/hour

** Heating: by electricity

** Atomizer: rotary with 20000RPM

** Dust collection: sack device

** Inlet temp: 100℃~300℃, it's adjustable 

** Outlet temp: 50℃~90℃, it's adjustable

** Drying chamber size: 1.5m(inside diam) * 1.22m(height) * 55°(taper angle)

** Total power: about 21KW

** Whole dimension: 3500mm(W) * 1700mm(D) * 3000mm(H)

*** ALL ABOVE INFO BASED ON WATER EVAPORATION WITH 10KG PER HOUR, FOR DETAILED REQUIREMENTS, KINDLY ASK FOR US.

Contact Supplier