Wood chips dryer machine

Wood chips Dryer machine also is named Wood Shavings Drying Machine. Wood Shavings Dryer is the key drying equipments for drying and dewarting wood shavings. It can dry the wood shavings from moisture 40-50% to moisture 8-15% which is suitable for storage, or according to the clients' requirements. The moisture inside the wood chips mainly are free water and biological water. Free water is easier to be dewatered, and biological water is difficult to be got rid of.

We Henan Hongji Company has been worked in the drying of wood chips, sawdust, wood shavings for more than 10 years. From then on, we have seen many different kinds of drying methods with varying degrees of success. Our past experience has proved that the most economic and efficient method for drying wood shavings is to use of Rotary Drum Dryer.

◆ Energy Saving: More economical to operate when fuel costs are taken into account.  

◆ Big drying intensity. As wood shavings are high dispersion inside the flue gas, all superficial area of the wood chips (or wood shavings) are the effective drying area. 

◆ Short Drying Time

◆ Compact Structure, Less occupied area, easy installation and maintenance. 

◆ Large Capacity, High Heat Efficiency.

◆ Stable Quality Wood Shavings:  Low breakage ratio, little smell of flue gas.

◆ Wet material moves through the drum in an hot air stream created by the wood shavings dryer's Induced Draft Fan. 

◆ The wood shavings are repeatedly carried to the top of cylinder by flights so they are constantly and intimately showered through the hot gas. Moisture is given off continually as they move along the hot air stream.

◆ The wood shavings move slower forward through the cylinder under the function of the induced draft fan at the discharge end. The warm damp exhaust gases(water vapour) are separated from the dried product in the primary cyclone separator, and the dried wood shavings fall out the bottom onto a vibrating shaker screen to remove fines. (Note that the optional secondary "cooling fan" and cyclone collector, which under favorable ambient conditions can remove several additional points of moisture.)

◆ Precise control of exhaust air temperature assures accurate moisture control, without product degradation. Controls react instantaneously to any temperature change, and immediately adjust the heat input to assure uniform drying and accurate control of the moisture content of the finished product.

◆ If the product is fragile, a "negative air" system may be used, where an airlock is installed at the bottom of the primary cyclone collector and the induced draft fan is positioned downstream to avoid product breakup caused by passing through the fan. However, we do not recommend this arrangement with certain species of wood, since we have found that resins present in the warm damp exhaust can quickly accumulate on the sidewalls of the pipe and plug it, making for a difficult cleaning job.

We Henan Hongji Mine Machinery Co., Ltd. is a professional mining machinery manufacture with ISO, CE Certificate, specialized in produce and develop various kinds mining machines for over 40 years, we are professional in:

• - Stone crushing production line 5-500tph

• - Sand making production line 50-200tph

• - Ferro & Non ferro beneficiation process line (Au, Cu, Mo, Pb, Zn, Mn, Fe, Mn, etc)

• - Industrial drying equipments (For sand, gypsum, filter cake, peat, biomass, clay, fertilizer, bentonite, Kaolin)

• - Powder grinding equipments 80-200 mesh ( limestone, cement clinker etc)

• - Cement/ Lime/ LECA production line with rotary kiln

  

Since 2008 the International Trade Department opened, we had export 44 countries and regions, rotary drying machines have been  exported to Korea, Vietnam, Malaysia, Australia, Pakistan, Turkey, Spain, Azerbaijan, Russia, Kazakhstan, Uzbekistan, Bolivia,  Panama, Argentina , Colombia and so on, with successful projects and excellent quality we have very good  reputation from our clients.

 



 



 

Pre-sale: 
1. Depending on customer's requirement, we insist on "making profit at lowest investment" and choose best machine.
2. Design the most reasonable project and maximum customers' profit. 
3.Provide engineers to scene to plan work site. 
4. Provide equipment list,design drawing, construction drawing, equipment install drawing.

During-sale: 
1.Depend on scene, draw design drawing , construction drawing, equipment install drawing. 2.Manufacturing products strictly on contract while customer constructing.
3.Testing ex-work, delivery, customer acceptance. 

After-sale: 
1.Provide engineer to wok site guiding install. 
2.Test equipment after installation, training operators. 
3.Visit work site regularly

‍Please do not hesitate to contact with us for more details about wood chipes dryer machine !

Skype: kellyliu_1987

Whatsapp: 0086-15137190419