High-Efficiency Fluidized Dryer
| Place of Origin: | Jiangsu |
|---|
Company Profile
| Location: | Jiangyin, Jiangsu, China (Mainland) |
|---|
Product Detail
| Model No.: | GFGQ-100 |
|---|
Product Description
Main usage: this unit is applied for the drying of granule materials in the industries of pharmacy, chemical and foodstuff, as well as for the drying of powders or viscous substance and thermal sensitive materials for multiple kinds of drying functions.
Specialities:
1) B using hot air flow, the powders or wet and viscous materials are forced in floating
and fluidized state, which can be heated quickly. Meanwhile, the water content
inside of the target materials can be vaporized and brought out with hot air
flow. The drying speed is accelerated under harmonized temperature
2) Material barrel of dryer is pushed up by air cylinder with simple structure, easy
operating, and reliable sealing
3) The material barrel is equipped by stirrer, and the special air-distribution-plates
without any dead angle inside. The finished material is discharged by turning over
the bottom plate, which dump and cleansing become fast and more convenient.
Technical data:
1) Capacity: 60-100kg/h
2) Total power: 11.67kW
3) Wind rate of suction fan: 3,488m3/h
4) Full pressure of blower: 5,330Pa
5) Steam pressure: 0.40-0.60MPa
6) Air-inlet temperature drying: 60-110oC (adjustable constant
temperature)
7) Overall size of main frame (L x W x H): 2,300 x 1,500 x 3,000mm
8) Weight of main frame: 1,200kg
Specialities:
1) B using hot air flow, the powders or wet and viscous materials are forced in floating
and fluidized state, which can be heated quickly. Meanwhile, the water content
inside of the target materials can be vaporized and brought out with hot air
flow. The drying speed is accelerated under harmonized temperature
2) Material barrel of dryer is pushed up by air cylinder with simple structure, easy
operating, and reliable sealing
3) The material barrel is equipped by stirrer, and the special air-distribution-plates
without any dead angle inside. The finished material is discharged by turning over
the bottom plate, which dump and cleansing become fast and more convenient.
Technical data:
1) Capacity: 60-100kg/h
2) Total power: 11.67kW
3) Wind rate of suction fan: 3,488m3/h
4) Full pressure of blower: 5,330Pa
5) Steam pressure: 0.40-0.60MPa
6) Air-inlet temperature drying: 60-110oC (adjustable constant
temperature)
7) Overall size of main frame (L x W x H): 2,300 x 1,500 x 3,000mm
8) Weight of main frame: 1,200kg
