Hydraulic Pressure Sensor
| Min. Order: | 100 Piece/Pieces |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | L/C, D/P, D/A, T/T, WU |
| Supply Ability: | 120000 |
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Trading Company, Agent |
Product Detail
| Model No.: | EPS-002 Series -321009 |
|---|---|
| Means of Transport: | Ocean, Air, Land |
| Product: | Hydraulic pressure sensor |
| Pressure measurement range: | Within 0.1MPa ~ 100MPa |
| Max. operation temperature: | -30℃ ~ 85℃ |
| Power supply: | 10-30VDC |
| Measurement accuracy: | ±0.1%F.S; ±0.25%F.S; ±0.5%F.S |
| Insulation: | >100MΩ at 50V |
| Response time: | ≤10ms |
| Pressure port: | M20×1.5, G1/2, G1/4, NPT1/2, NPT1/4 optional |
| Electromagnetic radiation: | EN50081-1/-2 |
| Electromagnetic sensitivity: | EN50082-2 |
| Production Capacity: | 120000 |
| Packing: | Standard packing exporting |
Product Description
Brief introduction:
EPS-002 series of hydraulic pressure sensor by the load cell sensor (also known as pressure sensors ), is composed of three parts , the measurement circuit and process connection. It will load cell element sensor to feel the pressure of gases, liquids, and other physical parameters change into a standard electrical signals (such as 4 ~ 20mADC, etc.), alarm device, recorder, adjust the secondary instrument to measure supply instructions, instructions and the process of adjustment. The hydraulic pressure sensor, hydraulic pressure signals to the electronic equipment, and thus put pressure on the computer display.
The principle is roughly as follows :
Hydraulic pressure into mechanical signals produced by pressure or other media and then become current ( 4 - 20mA) such as electronic signals through the display to set and adjust so that the system reaches the set requirements . Pressure and the size of the voltage or current into a linear relationship is generally positive relationship between the transmitter output voltage or current with increasing pressure.
Ordering:
Input signal | Connection type | Pressure portthreads | Addition |
A= 4 ~ 20mA A1=0~ 20mA B=0 ~5V D=1-5V E=0-10V | H=HIRSCHMANN plug C=Cableline outlet GX=Aviation plug | Ga=G1/4 thread Gb=G1/2 thread Na=1/2 NPT thread Nb=1/4 NPT thread Ma=M20X1.5 face seal thread Mb=M20X1.5 waterline seal thread U=7/16 -20UNF threads | La=Gauge with LED Lb=Gauge with LED and 2 control points Va=10-30VDC Vb=220VAC/VDC G=Gauge pressure. A=Absolute pressure S=Sealed gauge pressure M=Intrinsically safeexplosion-proof Exia IICT6 Ua=0.1%F.S Ub=0.25%F.S |
Specification:
Item | Description | |
Pressure range | Within 0.1MPa ~ 100MPa | |
Overload pressure | 2 Times the ratedpressure | |
Damage pressure | 4 Times the ratedpressure | |
Accuracy | ±0.5%F.S | |
Stability | Typical value: 0.1%F.S/Max. value: 0.25%F.S | |
Operationtemperature | -30℃ ~ 85℃ | |
Compensationtemperature | -10℃~70℃ | |
Compatible media | All corrosive mediacompatible with 1Cr18Ni9Ti | |
Output signal | 2- lines: 4~20mA 3- lines: 0~20Ma/0~10VDC | |
Power supply | 2- lines: 10~30VDC 3- lines: 12~30VDC | |
Load resistance | 2- lines: (U-10) / 0.02(Ω) 3- lines and 4-lines : Elec. Current: (U-12) / 0.02(Ω) Voltage:>100K Ω | |
Insulation | >100M Ω at 50V | |
Electricalconnection | Thewater outlet ( five waterproof sealed), shell protection IP68 | |
Shell protection | IP67 | |
Response time | ≤10ms | |
Pressure portthreads | M20×1.5,G1/2,G1/4,NPT1/2, NPT1/4 | |
Form of pressure | G= Gauge pressure/ A= Absolute pressure / S= Sealed gaugepressure | |
Electromagneticcompatibility | Electromagnetic radiation: EN50081-1/-2; Electromagnetic sensitivity: EN50082-2 | |
Dimensions:
Connector type | ||||
Plug | 2 Wires | Cable | 3 Wires | Cable |
1 | Power | Red wire | Power | Red wire |
2 | Output | Blue/Green wire | power line ground | Black wire |
3 | Power | Blue/green wire | ||
4(E) | Shield | Yellow wire | Shield | Yellow wire |
Pressure port connection threads | |||||
1 | M20X1.5 | 3 | NPT 3/8 | 5 | G 1/4 |
2 | NPT 1/4 | 4 | NPT 1/2 | 6 | G 1/2 |
Form of signal output | |
2- LINES | 4-20mA |
3- LINES | 4-20 mA; 0-10 mA; 0-20 mA |
0- 5VDC; 0.5 – 4.5VDC; 1 - 5VDC; 0 - 10VDC | |
4-LINES | 4-20 mA; 0-10 mA; 0-20 mA |
0- 5VDC; 0.5 – 4.5VDC; 1 - 5VDC; 0 - 10VDC | |
.jpg)
