Electric Pressure Sensor
| Min. Order: | 100 Piece/Pieces |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | L/C, D/P, D/A, T/T, WU |
| Supply Ability: | 120000 |
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Trading Company, Agent |
Product Detail
| Model No.: | EPS-001 Series -321008 |
|---|---|
| Means of Transport: | Ocean, Air, Land |
| Product: | Electric pressure sensor with high-volume and low-cost |
| Pressure measurement range: | Within 0.1MPa ~ 35MPa |
| Max. operation temperature: | -30℃ ~ 85℃ |
| Stability: | Typical value: 0.25%F.S / Max. value: 0.4%F.S |
| Power supply: | Two lines: 10-30VDC, Three lines: 3- 10-30VDC/AC; 12-30VDC/AC |
| Insulation: | >100MΩ at 50V |
| Shell protection: | IP67 |
| Pressure port: | M20×1.5, G1/2, G1/4, NPT1/2 optional |
| Electromagnetic radiation: | EN50081-1/-2 |
| Electromagnetic sensitivity: | EN50082-2 |
| Production Capacity: | 120000 |
| Packing: | Standard packing exporting |
Product Description
Brief introduction:
EPS-001 series electric pressure sensor is a high-volume, low-cost, consumer and industrial use, cost-effective products . Widely used for gas, liquid pressure detection, such as water, oil, mildly corrosive liquids and gases industry.
EPS -001 electric pressure sensor is made of stainless steel structure, pressure cores used imported famous brand, dedicated transmitter conversion circuit, and can facilitate its zero and full scale calibration, certified intrinsically safe , explosion-proof certification and CE certification . Two-wire system circulation output leads nonpolar; three-wire voltage type AC and DC.
In addition to the structure and output of more than 10 standard specifications, in order to ensure that the requirements of high-volume applications, customize a variety of special requirements for bulk users body products.
Ordering:
Input signal | Connection type | Pressure portthreads | Addition |
A= 4 ~ 20mA B=0 ~5V D=1-5V E=0-10V | H=HIRSCHMANN plug C=Cableline outlet GX=Aviation plug | Ga=G1/4 thread Gb=G1/2 thread Na=1/2 NPT thread Nb=1/4 NPT thread Ma=M20X1.5 face seal thread Mb=M20X1.5 waterline seal thread U=7/16 -20UNF threads | La=Gauge with LED Lb=Gauge with LED and 2 control points Va=8-30VDC Vb=220VAC/VDC G=Gauge pressure. A=Absolute pressure S=Sealed gauge pressure M=Intrinsically safeexplosion-proof Exia IICT6 Ua=0.25%F.S accuracy Ub=0.5%F.S accuracy |
Specification:
Item | Description | |
Pressure range | Within 0.1MPa ~ 35MPa | |
Overload pressure | 2 Times the ratedpressure | |
Damage pressure | 4 Times the ratedpressure | |
Accuracy | ±0.5%F.S | |
Stability | Typical value: 0.25%F.S/Max. value: 0.4%F.S | |
Operationtemperature | -30℃ ~ 85℃ | |
Compensationtemperature | -10℃~70℃ | |
Compatible media | All corrosive mediacompatible with 1Cr18Ni9Ti | |
Electricalproperties | 2- lines: 4~20mA 3- lines: 10~30VDC 0~10VDC | |
Power supply | 2- lines: 10-30VDC 3- 10-30VDC/AC;12-30VDC/AC | |
Insulation | >100M Ω at 50V | |
Electricalconnection | Thewater outlet ( five waterproof sealed), shell protection IP68 | |
Shell protection | IP67 | |
Pressure portthreads | M20×1.5,G1/2,G1/4,NPT1/2 | |
Form of pressure | G= Gauge pressure/S=Sealed gauge pressure | |
Electromagneticcompatibility | Electromagnetic radiation: EN50081-1/-2; Electromagnetic sensitivity: EN50082-2 | |
Dimensions:
Connector type | ||||
Plug | 2 Wires | Cable | 3 Wires | Cable |
1 | Power | Red wire | Power | Red wire |
2 | Output | Blue/Green wire | Output | Black/Green wire |
3 | Power | Black wire | ||
4(E) | GND | GND | ||
Pressure port connection threads | |||
1 | M20X1.5 | 3 | G 1/4 |
2 | NPT 1/4 | 4 | G 1/2 |
Form of signal output | |
2- LINES | 4-20mA |
3- LINES | 0- 5VDC; 0.5 – 4.5VDC; 1 - 5VDC; 0 - 10VDC |
.jpg)
