|
Item
|
Specification
|
|
Applicable Fibers
|
SM(ITU-T G.652), MM (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
and other single mode fiber including ITU-T G.657 fiber
|
|
Fiber count
|
Single
|
|
Applicable fiber dimensions
|
Cladding Diameter: 80μm to150μm
Coating Diameter:100μm to 1,000μm
|
|
Fiber setting and cleaved length
|
Sheathe clamp A (standard) : For coating dia. up to 250um (8 to 16mm cleave),
coating dia. Of over 250um (16um cleaver)
Sheathe clamp B (option) :For coating dia. up to 1000um (8 to 16mm cleave)
Sheathe clamp C (option) :For 900um dia. Loose tube fiber (8 to 16mm cleave)
Fiber holder (option) :FH-60-250 and FH-60-900 (10mm cleaver)
|
|
Splicing modes
|
100 preset and user programmable modes
|
|
Typical average splice loss
|
0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS
(Measured by cut-back method relevant to ITU-T and IEC standards)
|
|
Return loss
|
>>60dB
|
|
Splicing time
|
Typical 9 sec. with SM FAST, 10sec. with SM AUTO and 13sec with AUTO
modes with standard SM (ITU-T G.652)
|
|
Splice Loss estimate
|
Available
|
|
Attenuation splicer function
|
Intentional high splice loss of 0.1dB to 15dB (0.1dB step) can be made for an
in-line fixed attenuator
|
|
Tube heater / heating time
|
Built-in tube heater with 30 heating modes.Typical 30 seconds with FP-03 sleeve,
|
|
Applicable protection sleeve
|
60mm, 40mm and Fujikura FPS01 series.
|
|
Storage of splice result
|
The last 2000 results to be stored in the internal memory
|
|
Tension test
|
1.96 to 2.25N
|
|
Operating condition
|
0 to 5,000m above sea level, 0 to 95%RH and -10 to 50 degC and up to 15m/s wind velocity, respectively
|
|
Storage condition
|
0 to 95%RH and -40 to 80 degC respectively.
Battery:-20 to 30 degC for long term
|
|
Dimensions
|
136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)
|
|
Weight
|
2.3 kg (5.1 lbs) with AC adapter ADC-13; 2.7kg with BTR-08
|
|
Viewing method
|
Two CMOS cameras and 4.1 inch TFT color LCD monitor
|
|
Fiber view and
magnification
|
300X for single X or Y view, or 187X for X and Y view
|
|
Power supply
|
Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13, 13.2V DC with BTR-08 battery
|
|
No.of splice cycles with battery
|
Typical 160 cycles (splice / tube heat) with BTR-08
|
|
Electrode life
|
2500 arc-discharges
|
|
Terminals
|
USB 1.1 (Mini-B type) connector for PC communication.
6-pin Mini-DIN connector for HJS-02/03 or SH-8 power supply
|
.jpg)
