| 1\After the complete dissolving of the solution,turn on the pump switch at the first ,the negative solution will spout from the nozzle. |
| 2\Be sure that the material and anode are connected closely and keep horizontal. |
| 3\Adjust voltage according to the size of the material. The higher voltage, the stronger current. |
| 4\It is working normally that the ammeter hand leaves from"0",when nozzle closes to the material.The nearer material,the stronger current. |
| 5\Finished of the operating rules,Remember turn the voltage regulator to "0"after work finish.Keep current within the prescribe limits.by adjusting voltage when you use if.Do not make the current too strong to spoil the material surface by hot water of some damage happende cause for machine over loading. |
.jpg)
.jpg)