13.56MHz RFID Module PCD RC522 RC523

This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.

JMY609, based on NXP PCD, is thereader/writer module. The module supports series IC cards according toISO14443A, ISO14443B and imitates the USB keyboard to read and outputthe card data. JMY609 is reader/writer module with USB interface (HIDstandard). In the systems of Windows, Linux and other PC systems supportUSB keyboard, the module imitates the USB keyboard to operate the carddata. With our software and DIP switch, the users can set the reader ifto read the number of the card or the data of the card or both. And thedata can be positive sequence output or be reverse order output.Meanwhile the users can choose freely the key output such as enter, tabetc. after the output of the number and the data of the card. Thedefault of the JMY609 is configuration mode in factory setting. If youwant to let the reader work, you need cofigurate it through the softwareand input the configuration information to the reader. There are 2 SAMcard slots in the reader. If the users need read the SAM card and usethe SAM to cooperate with the operation, and then you can contact us, wewill help you do the job.

• Qualifications:

• • PCD: NXP RC522, RC523

• • Working frequency: 13.56MHz

• • RF standard: ISO14443A, ISO14443B

• • Operating distance: 80mm (Mifare One, typical distance)

• • SAM card slot: 2 slots, (supportedISO7816 T=0 and T=1)

• • Interface: USB (HID standard)

• • Power supply: DC5V

• • Power consumption: 180mA

• • Dimension: 123mm×88mm×25mm

• • Weigh: about 100g

• • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)

• • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)