se11 13.56MHz RFID Module with Interface IIC UART RS232C or USB

This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.

JMY602 series are RFID reader/writer modulewith IIC or UART or USB ports. There are 2 SAM card slots in the modulewhich supports SAM cards compliant with ISO7816 (T=0 and T=1). And alsoit supports SAM card(38400bps)which was used in domestic card managementsystem.
JMY602 has various functions and supports multi ISO/IECstandard of contactless card; the cards from different suppliers. Thedesigner combined some frequent used command of RF card and then usercould operate the cards with full function by sending simple command tothe module. The module and antenna are integrated design. The impedancebetween RF module and antenna was tuned by impedance analyzer. And thenthe module has excellent performance and stability.

• Qualifications:

• • PCD: NXP RC500, RC531, RC632, RC400

• • Working frequency: 13.56MHz

• • RF standard: ISO14443A, ISO14443B, ISO15693

• • Operating distance: 100mm (Mifare One, typical distance)

• • Anti collision ability:Full function anti collision; be able to process multi-cardssimultaneously; be able to set operate single card only

• • Auto detecting card: Supported, default OFF

• • SAM card slot: 1 slot, 9600bps/38400bps

• • EEPROM: 512 Bytes

• • PPSS: supported

• • Interface: IIC, UART, RS232C or USB (embedded CP2102 USB to RS232 converter)

• • Baud rate: IIC: 400Kbps, UART/RS232/USB to RS232: 19200--115200 bps

• • Max.command length: 254 Bytes /511 Bytes

• • Power supply: DC5V

• • Power consumption: 80mA

• • Dimension: 100mm×70mm×10.2mm

• • Weight: about 120g

• • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)

• • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)

• • ISP: supported

• • RoHS: Compliant