13.56MHz RFID reader with Interface: USB (HID standard)

MR761 series, based on NXP PCD, is thedesktop reader. The reader supports series IC cards according toISO14443A, ISO14443B and outputs the data by the way of simulationkeyboard through USB interface. MR761 IC card is desktop reader with USBinterface (HID standard). In the systems of Windows, Linux and other PCsystems support USB keyboard, the reader imitates the USB keyboard tooperate the card data. With our software and DIP switch, the users canset the reader if to read the number of the card or the data of the cardor both. And the data can be positive sequence output or be reverseorder output. Meanwhile the users can choose freely the key output suchas enter, tab etc. after the output of the number and the data of thecard.
        The default of the MR761 is configuration mode in factorysetting. If you want to let the reader work, you need deploy it throughthe software and input the configuration information to the reader. Thereader embeds 2 SAM card slots. If the users need read the SAM card anduse the SAM to cooperate with the operation, and then you can contactus, we will help you do the job.

• Qualifications:

• • PCD: NXP RC522, RC523

• • Working frequency: 13.56MHz

• • RF standard: ISO14443A, ISO14443B

• • Operating distance: 80mm (Mifare One, typical distance)

• • SAM card slot: 2 slots, (supportedISO7816 T=0 and T=1)

• • Interface: USB (HID standard)

• • Power supply: DC5V

• • Power consumption: 0.6W

• • Dimension: 123mm×88mm×25mm

• • Weight: about 100g

• • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)

• • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)