Hex Flange Head Concrete Screws

    Concrete screws have unique design and excellent performance to anchor and fix the objects temporarily or permanently in the concrete base material. Heavy duty concrete screws are designed hardening body by heat treatment and heavy duty high and low double self tapping external threads to drill into the concrete structure substrate easily and quickly,being suitable to install and use medium and heavy loads.

    Concrete screw anchor bolts can replace some of concrete expansion bolts and fasteners and can be easily removed no damage the base materials after installing. Easydrive concrete screws are installed by high speed self tapping rotation under driving with the impact wrench,not swell and burst around the base,being very suitable to install near the substrate edge or close to other anchors or fixings. 

    Being widely used in the concrete,masonry or brick works to anchor and fixing the objects, providing metric and inch sizes with various head are suitable for different installation and use places. Besides ZP or ZYP, hot dip galvanized or Dacromet spraying are available with good oxidation resistance, rust resistance and chemical corrosion resistance.

Product Features:

■ Design unique heavy duty high-low double self tapping external threads on the body.

■ Hardening anchor body by heat treatment process.

■ Suitable for medium and heavy duty loading purpose.

■ Easily remove after installing without damage substrate.

■ Easy and quick to install by high speed self tapping rotation under driving with the impact wrench.

■ Allow to install near the substrate edges and close to other anchors and fixings.

■ Enable to replace some concrete anchors and fixings in use.

■ Providing metric & inch sizes with various head types and surface treatment.

Materials & Surface treatment: 

 ☞ Carton steel & ZP/ZYP/HDG/Dacromet

The Substrate:  ☑ Concrete ☑ Masonry ☑ Brickwork ☑ Solid wall ☑ Rock-Stone

Applications:

♣ Pipe installation engineering,pipe support, pipe line hanger.

♣ Special door industry,Wall panel,Seats.

♣ Installation of subway tunnels,bridge construction works.

♣ Installation of grating,fence,subway channels and heavy machinery installing.

♣ Cable and tower racks, metal exterior insulation systems.

♣ Installation of starter bars for structural expansion and rectification works.

♣ Curtain walls, cladding and precast concrete components,rocks.

Installation Procedures:

1]. Drill a hole in the substrate to ensure the proper diameter and embedment depth.

2]. Use a nylon brush or high pressure air pump to clean all debris and dust inside the hole.

3]. Prepare impact wrench setting correct impact socket.

4]. Pass concrete screw through a guide hole in the fixture and vertically aligned with and close to the pre-drilled hole in the substrate.

5]. Insert the hex flange head into the impact socket and drive the impact wrench.

6]. To tighten until being fixed fully.

Product size description: (mm/inch)

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

** The special sizes and head types are available.