Hita Gambit

 

 

 

 

Main screen of SoftwarFor programming of Keys or Transponders of BMW cars you need to read eeprom dump from EWS or CAS and software automaticly prepare key/transponder ready to start carFor programming of Keys or Transponders of Audi A8/VW Touareg/VW Phaeton/Porsche Cayenne/ Bently Continental you need to read eeprom from kessy (93c86 eeprom) and software automaticly prepare key/transponder ready to start car. This is for car up to 2007 year.For programming of Keys or Transponders of Audi A8/VW Touareg/VW Phaeton/Porsche Cayenne/ Bently Continental you need to read eeprom from kessy (93c86 eeprom) or eeprom from Engine Control Unit and software automaticly prepare DEALER key/transponder ready to start car. This is for car 2007 and 2008 year.

 

 

 

 

First you must Read eeprom dump from CAS2 ( you can use any programmer )

1. If you use Transponder you must switch Operation mode in PASSWORD. If you use key you must switch Operation mode in Crypto.

2. Push button - Load immobilized dump and choose readed eeprom from CAS2.

3. Next step is to write what number of key you want to programm in CAS2 ( in this example is Key number 3) after push button Generate key and Hitag2 programmer programm Transponder ( or Key).

4. After finishing programming you see message : Programming done

 

5. After successcull programming of transponder or key you must push button - Save immobilizer dump
6. Write new name of modify by software dump.
7. Save this new dump and programm in CAS2

Now you can start car with this transponder.

 

 

 

Note 1. Transponder is OTP (One Time Programable).

Note 2. Password Mode.

Note 3. Transponder can be emulated on PCF7935.

Note 4. Transponder can be read afte