idc module LSA disconnection module

10 pairs LSA disconnection module

We are professional manufacture in the production of LSA disconnection module, STB module and other realted accessories.

Descriptions

TP-1201-10 LSA disconnection module is used throughout the distribution level, in the main distribution frame (MDF), in the cross connection cabinet (CCC) and in the distribution point (DP) boxes. It is highly reliable and cost-effective wire connection system for modern telecommunications and data networks.

It adopts IDC (Insulation Displacement Connection) technique, which means that no soldering, wire-stripping or the use of screws is necessary, and which clamps the wires at a 45 degree angle, thus dramatically reducing the risk of a poor termination and increasing the wiring productivity.

TP-1201-10 LSA disconnection modules use a normally closed two piece contact, with a convenient disconnection feature. By inserting a disconnect plug into a wire pair, you can temporarily or permanently disconnect the circuit. A test cord can be inserted into a pair to test each side of the circuit independently. This greatly accelerates fault identification.

The center contact point can also be used for monitoring or overvoltage protection.

Main Features

1.Insulation Displacement Connection

2.No Wire-stripping, screw and solder free

3.Reliable connections

4.Clear labeling

5.Flame retardant performance

6.Modular design and installations

7.Gas tight connection

8.Two wires per contact

9.One push wire insertion

10.No Wire-stripping, screw and solder free

11.Only one inexpensive tool required10 pairs LSA disconnection module

Schematic Diagram 

Technical Parameters

1.Working temperature: -40℃ ~ 80℃

2.Relative humidity: ≤93%(+40℃)

3.Appearance: the color of all metal and plastic parts is uniform, without any scratch, rust, crusting and cracks.

4.The labels are clear and complete.

5.Insulation resistance: under normal ambient conditions, after high temperature test, low temperature test, temperature varing test and humidity heat test, the insulation resistance between any two independent contacts, and/or between contacts and metal parts ≥ 1000MΩ

6.Contact resistance between contacts: under normal ambient conditions, the contact resistance between contacts ≤7 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤3 mΩ And after inserting the connection cord (or test cord) into the module for 200 times, the increasing resistance ≤3 mΩ

7.Contact resistance between conductor and contact: under normal ambient conditions, the contact resistance between contacts ≤3 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤2 mΩ. And after terminating for 200 times, the increasing resistance ≤2 mΩ.

8.Dielectric strength: under normal ambient conditions, after high temperature test, low temperature test, temperature varing test and humidity heat test, the insulation resistance between any two independent contacts, and/or between contacts and metal parts is able to withstand an AC voltage of 1000V (virtual value) at 45Hz~60Hz sinowave for 1 minute, without spark over and flying arc

9.Gas tight performance: contact touches the conductor at both sides, and thus forming the gas tight area, while the area of gas tight occupies ≥50% of the touched area on each side.

10.Conductor diameter range: 0.32mm-0.6mm, while insulation ≤ 1.4mm

11.Pulling strength:≥25N while pulling from the vertical side of the contacts

12..Flame retardant performance: all plastic parts are flame retardant, reaching grade of UL FV0

13.Life circle: ≥200 times

Order Data

Packing Pictures                                                                                                                                                                                                     

Why TAEPO                                                                                                                                                                                                                 

1. We are Alibaba Assessed 6 years Gold Supplier.

2. Warranty: 1 year. 100% QC inspection before shipment.

3. We have OEM experience more than 12 years. Every year, we do lots of OEM/ODM items for our customers.

4. We participated in many tenders each year. We are familiar with the tender procedures and documents preparations. With most competitive prices and profession in products, we are awarded dozens of tenders each year. 

5. We are the One-stop Solution Provider for Communication Connectivity Industries. With good quality, competitive price, prompt delivery and with sound after-sale service.

Workshop and Warehouse                                                                                                                                              

Quality Control                                                                                                                                                                                                             

Our Certificate and EXPO                                                                                                                                                                        

Our Customer                                                                                                                                                                                                               

Application Cases                                                                                                                                                                                                  

Shipping and Payments                                                                                                                                                                          

If you have any further question, pls let us know freely !