Cable tester for RJ11, RJ12, RJ45 and BNC

1) Network Cable Tester is a powerful special tool to prevent and solve cable installation problem.
2) Network Cable Tester is the best choice to verify any speech and data cable installation procedure.
3) The tester is capable to have a number of tests such as cable connection sequence, length, user jumper and cable connection continuity and determine any open circuit, short circuit, jumper or cross-talk interference.
4) It is a useful tool to reduce cable installation cost and save cable installation time.

One person enough to complete cable continuity checking.

Checking cabling error in Cat5e, Cat6, coaxial cable and telephone lines, namely as open circuit, short circuit, reverse connection and cross talk interference.

Locating the wiring or connection error.

Measuring the length of the cable and determining the distance of open circuit and short circuit.

Dynamically calibrating the cable length and making measurement of length as accurate as 97%

Simple and easy to use, and big screen to display the test results clearly.

Portable with long battery life (stand by mode 50 hours)

Automatic time-delay powering off.

Measuring of length and pair both available with or without far-end recognizer.

Locating cable and there are 8 far-end passive test jacks (ID No. ID1-ID8)

Far-end recognizer with prompting voice.

Single-chip microcomputer software watchdog design and reliable operations.

Overall Dimension

180 x 80 x 40 mm

Power Supply

4 x 1.5V Size AA batteries with power consumption 16 mA

Display

Special 4 x 16 character big screen LCD lattice (valid visual field 61.6 x 25.2 mm)

Type of Test Cable

STP/UTP twin twisted cable, coaxial cable, telephone line

Working Ambient Temperature

-10-+60_

Tester Port

Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer

RJ45 port (R). The extra BNC and RJ11 converters are used to

measure and check the continuity of coaxial cable and telephone line.

Length Measurement of Twin Twisted Cable

Scope: 1 350 M ( 3 1,200 ft)

Calibration accuracy: 3% (+/- 0.5M or +/- 1.5 ft) (calibrating cable > 5 M)

Shipment accuracy: 5% (+/- 0.5 M or +/- 1.5 ft). (AMP, AT&T Class 5 cable)

Display: M or ft.

Length Calibration:

User can set calibration factor by himself with a given length cable. The

length of calibrating cable is more than 5 M.

Wire Sequence and Locating Cable Error:

Check errors such as open circuit, short circuit, reverse connection, crossover

or cross-talk interference.

Locating Cable

far-end passive test jacks (ID 1 ≥ ID 8).

Automatic Time-delay Shut Off Time:

The tester does not operate for 30 minutes.

Contact Supplier