1 pair STB module with protection against over-voltage over-current

TP-1301-1GP STB module is the mostly widely used IDC module and ideal connectivity products. It adopts IDC (Insulation Displacement Connection) technique. The plastic is PC. The contact is tinned phosphor bronze, with silver plated. TP-1301-1GP module is with protection against over-voltage and over-current.

Insulation Displacement Connection

Reliable connections

Flame retardant performance

Modular design and installations

Water and humidity proof

Working temperature: -45℃ ~ 60℃

Storage temperature: -50℃ ~65℃

Relative humidity: ≤85%(+30℃)

Atmospheric pressure: 70kPa ~106kPa

Appearance: the color of all metal and plastic parts is uniform, without any scratch, rust, crusting and cracks.

The labels are clear and complete.

Insulation resistance: under normal ambient conditions, after high temperature test, low temperature test, temperature varying test and humidity heat test, the insulation resistance between any two independent contacts, and/or between contacts and metal parts ≥ 1000MΩ

Contact resistance between contacts: under normal ambient conditions, the contact resistance between contacts ≤7 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤3 mΩ And after inserting the connection cord (or test cord) into the module for 200 times, the increasing resistance ≤3 mΩ

Contact resistance between conductor and contact: under normal ambient conditions, the contact resistance between contacts ≤3 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤2 mΩ. And after terminating for 200 times, the increasing resistance ≤2 mΩ.

Dielectric strength: under normal ambient conditions, after high temperature test, low temperature test, temperature varying test and humidity heat test, the insulation resistance between any two independent contacts, and/or between contacts and metal parts is able to withstand an AC voltage of of 1000V (virtual value) at 45Hz~60Hz sinowave for 1 minute, without spark over and flying arc

Nominal DC spark-over voltage (100V/s) : 230±20% V

Impulse spark-over voltage (1kV/us): ≤700V

Impulse discharge current (8/20us, 10 times) (a+b)-e: 5kA

Impulse discharge current (10/1000us, 300times) (a+b-e):100A

AC discharge current (50Hz, 1s, 10 times) )(a+b)-e:5A

Capacitance(1kHz): ≤1.5 pF

Transverse voltage duration: ≤200ns

Fail-safe response time: ≤15s

Gas tight performance: contact touches the conductor at both sides, and thus forming the gas tight area, while the area of gas tight occupies ≥50% of the touched area on each side.

Conductor diameter range: 0.32mm-0.6mm, while insulation ≤ 1.4mm

Pulling strength:≥25N while pulling from the vertical side of the contacts

Flame retardant performance: all plastic parts are flame retardant, reaching grade of UL FV0

Life circle: ≥200 times

Contact Supplier