Ram-type Milling Machine

1) Ram type Milling Machine with Digital Display and Ram Type Milling are newly developed product based on traditional knee type milling machine and have more advanced features than the general one. The machine can mill any angle surface through front half-sphere by swiveling milling head. Enlarged machining capacity, widened spindle speed range, infinitely speed changing, two sets operating handles for easy operation, interlock between locking and power/manual feed system, automatic lubrication system, sufficient rigidity and so on.

2) The machine can mill plane, groove, slant groove, even can mill plane and groove in cavity of some work piece. It is suitable for metal-working operation of all kinds of factories, especially for dies and moulds.
 
Specification:

Name		Unit	XS5646	XS5646/1
			X5646	X5646/1
Working table W*L		mm	460*1235	460*1635
T slot	Number		5
	Width	mm	18
	Distance	mm	80
Travel of three directions	Longitudinal	mm	900	1000
	Cross	mm	650
	Vertical	mm	450	470
Min. distance between spindle nose and table surface		mm	40
Swivel angle of milling head			any 360 degree in front half-sphere
Spindle taper			ISO40	ISO50
Spindle speed	Range	rpm	30-2050
	Number		27
Feed range of table and ram	Longitudinal	mm/min	10~1000
	Cross	mm/min	10~1000
	Vertical	mm/min	6~640
Rapid feed of table and ram	Longitudinal	mm/min	2200
	Cross	mm/min	2200
	Vertical	mm/min	1466
Number of feeds			infinitely variable
Main motor	Power	kw	5.5	7.5
	Speed	rpm	1440
Feed motor	Torque	Nm	15	30
	Speed	rpm	1500
Resolution of digital display		mm	0.005 (just XS series)
Positioning accuracy		mm	0.05 (just XS series)
Reset accuracy		mm	±0.01 (just XS series)
Max. bearing weight of table		kg	800	1000
Overall dimensions(L*W*H)		mm	2115*2220*1940	2125*2620*1965
Net weight		kg	3000	3200

Contact Supplier