12 channels isolated digital input RS485 Zigbee

S7302 zigbee digital input module has total 12 channels isolated wet contact or dry contact or open-collector input,one 0-24VDC analog input. Output use RS485 or ZIGBEE wireless. Zigbee can realize the point-to-point, point-to-multipoint, multipoint-to-multipoint data transmission, can form a star, peer to peer and mesh network structure. Can build huge Zigbee wireless network through setting modules address, signal channel and net ID. The S7302 can work in terminal mode or router mode through configure parameters. Both of Rs485 and Zigbee use the industry standard Modbus/RTU protocol.

 Highlights:

l        Isolated digital inputs can be configured as 32-bit counter input

l        Input can be dry contact, wet contact, open-collector output

l        Static ,lightning protection for each input

l        The input channel number is configurable, can be set up from 1 channel through 12 channels, improve frequency for small count input

l        Analog input can measure battery voltage

l        A lot of spare FLASH can be used to store user's parameters

l        RS485 or ZIGBEE for optional

l        Zigbee wireless range can up to 3000 meters

l        Can detect RS485 or ZIGBEE automatically, no need jumper

l        You can tell us your requirement. We will update our firmware even after you received the modules, you can update your modules through RS485/ZIGBEE.

Application:

ü        Remote data acquisition

ü        Process monitoring

ü        Industrial process control

ü        Energy management

ü        Supervisory control

ü        Security systems

ü        Laboratory automation

ü        Building automation

ü        Product testing

ü         Direct digital control

Technical data:

Input channel number-------------------------------------------------------------------------     12

Input range--------------------------------------------------------------------------+4V~+36V

Input protection---------------------------------------------------------------Static, lightning

Input signal----------------------------------------wet contact, dry contact, open-collector

Counter frequency--------------------------------100Hz@12channels;1000Hz@1channel

Counter length-----------------------------------------------------------------------------32-bit

       Output BUS------------------------------------------- RS485/ZIGBEE with Standard Modbus protocol

       Output Protection-----------------------------------------------------------------------------Lightning,static

       Power input-----------------------------------------------------------------------------------9~24V(AC/DC)

       Power consumption------------------------------------------------------------------------------------<0.6W

Ambient temperature:

              Operation-------------------------------------------------------------------  -20~85℃(-13~185℉)

              Storage--------------------------------------------------------------------  -40~100℃(-40~212℉)

Ambient humidity---------------------------------------------------------------------------10%~90%RH

Material,enclosure-----------------------------------------------------------------------Flame proof plastic

Enclosure rating--------------------------------------------------------------------------------------------IP31

Colour---------------------------------------------------------------------------------------------------Ice Blue

Size---------------------------------------------------------------------------------------------100*69*25 mm

Wiring diagram and description:

      Figure 1   Dry contact input

       Figure 2 wet contact input

Figure3 open-collector input

                  Figure 4  terminal  definition

1,Input wiring

Vcc1: Power source input for digital input 1 through 12

DI1-DI12: Digital input channel 1 through 12

3, Power wiring

       DC:   24V,   positive end

             GND,  negative end

AC:   24V,   hot line

GND,  neutral line

4, RS485 wiring, here is TTL level, we will provide RS485 to TTL card

TXD: TXD of MCU, TTL

RXD: RXD of MCU, TTL

GND: System ground, common ground for 8 digital input's dry contact mode

VCC: 5V power supply for Rs485 card can provide 100mA current for user sensor.

5, Reset parameter to default

Put the jumper between GND and INIT, the following parameters back to default.

n         Address of device:  254

n         Baudrate:19200

n       NOTE:INIT also can connect a 0-24VDC analog input

6, LEDs indication

Heart: Flashing when the system is working

Comm: Flashing when serial port communication

NET: Will flash in Configuration mode, keep lighting when enter a wireless network successfully

RUN: Will flash in Configuration mode. Will flash when Zigbee module in working mode