8-ch 0-10V 0-20mA NTC 10K analog input 8 channels 0-10v analog output 8 channels open-collector output ethernet modules

S5134 is a high quality and low cost analog data acquisition module with 8 universal analog inputs. Each input can be 0-5V,0-10V,0-20mA,thermistor,dry contact, open-collector input,8 channels 0-10V analog output,3 isolated digital input and 8 channels isolated open-collector digital output. The digital input can be dry contact, wet contact and open-collector, each input also can be 32-bit counter.S5134 has RS485 and rj45 two type interface,rs485 support standard Modbus RTU protocol and RJ45 support Modbus Tcpip protocol.It can easy integrate with PLC and labview with standard Modbus/Modbus Tcpip protocol

 Highlights

         Surge-protected analog inputs with 12-bit resolution and 100k sample speed

         Input can be any combination of 0-5V,4-20mA,0-10V,NTC 10K thermistor, open-collector and dry contact

         The channel number is configurable, can be set up from 1 channel through 8 channels, for analog input and set up from 1 to 6 for digital input, improve sample rate for small count input

         8 channels 0-10V analog output with high accurate reference chip

         Isolated digital inputs can be configured as counter input, total 32 bits,1000Hz

         Total 8 channels isolated open-collector digital output

         Standard ModBus TCPIP protocol,easy work with PLC

         Standard ModBus protocol allows for up to 254 unique devices on one RS485 network

        A lot of spare FLASH can be used to store user's parameters

        Can update your firmware via ISP through RS485 network, can provide any hex file to help you finish some logic control

         DIN support available

Application:

         Remote data acquisition

         Process monitoring

         Industrial process control

         Energy management

         Supervisory control

         Security systems

        Laboratory automation

         Building automation

         Product testing

         Direct digital control

Technical data:

Analog Input Resolution--------------------------------------------------------------------------------12-bit

Analog Input Channel Number------------------------------------------------------------------------------8

Analog Input range----------------------0-5V,0-10v,0-20mA, thermistor, dry contact,open-collector

Analog Input Protection---------------------------------------------------------------------Lightning,static

Analog Input Accuracy---------------------------------------------------------------------------------±0.1%

Analog Input  Zero drift-----------------------------------------------------------------------------±3uV/C

       Analog Input Sample Rate-----------60 sample/second(8 channels),900 sample/second(1 channel)

Analog Output Resolution-----------------------------------------------------------------------------12-bit

Analog Output Channel Number--------------------------------------------------------------------------8

Analog Output Range----------------------------------------------------------------------------------0-10V

Analog Output Accuracy--------------------------------------------------------------------±0.2% of FSR

Analog Output Zero Drift------------------------------------------------------------------------±30uV/C

Digital Input Channel Number-----------------------------------------------------------------------------  3

Digital Input Range-------------------------------------------------------------------------------+4V~+36V

Digital Input Signal----------------------------------------------wet contact, dry contact, open-collector

Digital Input Counter Frequency-------------------------------100Hz@6channels;1000Hz@1channel

Digital Input Counter Length---------------------------------------------------------------------------32-bit

Output channel number------------------------------------------------------------------------8

Output signal---------------------------------------------------------------------open-collector

Output current----------------------------------------------------------------maximum 40mA

       Output BUS----------------------------------------------------------------------------------Ethernet/RS485

         RS232/RS485 protocol--------------------------------------------------------------MODBUS/RTU

         Ethernet protocol------------------------------------------------------------------MODBUS/TCPIP

       Output Protection-----------------------------------------------------------------------------Lightning,static

Power input----------------------------------------------------------------------------------15~24V(AC/DC  

       Power consumption------------------------------------------------------------------------------------<0.6W

Ambient temperature:

              Operation-------------------------------------------------------------------------- -20~85C(-4~185F)

                   Storage---------------------------------------------------------------------------------------- -40~125C(-40~257F)

Ambient humidity-----------------------------------------------------------------------------------------------10%~90%RH

Material,enclosure-----------------------------------------------------------------------Flame proof plastic

Enclosure rating--------------------------------------------------------------------------------------------IP31

Colour----------------------------------------------------------------------------------------------White/Black

Size---------------------------------------------------------------------------------------------115*90*43 mm

Wiring diagram and description:

                                                        Top view figure

                                            Communication wiring diagram

Analog inputs wiring diagram

Analog outputs wiring diagram

Dry contact wiring diagram

Dry contact wiring diagram

Isoalted digital output wiring diagram

Inputs

Each analog input can be jumper-configured in 1 of 4 ways:

        0-5V signal

        0-10V

        0-20mA

        Dry contact, thermistor, open-collector. thermistor default is 10K NTC, but can custom according to your sensor type

All digital inputs can be jumper-configured in 1 of 2 ways:

       Wet contact input

      Dry contact, open-collector input

PINs and LEDs

Power supply

       24VAC: power supply positive input, has reverse protection, accept AC and DC input

-           : Power supply negative input

RS485 Port

        B: Connect to B of RS485

        A: Connect to A of RS485

        R: Connect to GND for RS485

Ethernet port

               Connect to local Ethernet network through RJ45 cable

Inputs

       Analog:

A1 ~ A8: Analog input 1 through 8

AGND: common for analog input 1 through 8,also use for analog output

       Digital:

DVCC: Power source input for digital input 1 through 3,wet contact input available

D1 ~ D3: Digital input channel 1 through 3

DGND: common for digital input 1 through 6, available in dry input mode

Outputs

       Analog:

AO1 ~ AO8: Analog output 1 through 8

AGND: common for analog output 1 through 8,also use for analog input

       Digital:

      O1~O8: Digital output channel 1 through 8

OGND: common GND for digital output 1 through 8

 Leds

BEAT: Will flash when system is working

Comm: Will flash when RS485 serial port communication