Electromotive Fiber End-face Cleaner Fiber Optic Termination Kit Fiber Optic Splicing Tool Kit

Electromotive Fiber End-face Cleaner ------ONT57

The ONT57 electromotive fiber-end face cleaner is designed not only to clean the male connector ends, but also to clean the female bulkhead adapters (Ferrule end-faces inside the adapters). It is a convenient and simple cleaning tool in fiber network maintenance and fiber components production.

Features

● Clean fiber end-face of PC and APC ferrule in diameter 2.5mm &1.25mm.

● Clean fiber end–face for male connector of ferrule and female connector of flange.

● Cleaning directly and without any cleaning liquids

● Only 3 seconds to finish the cleaning work and the cleaning grade up to 88%~98%

● Suitable for complex environment and field operation

● Low cost and high quality cleaning material

● Two AA batteries and continues 100 hours operation

Note:

ONT57 electromotive cleaner, is an accessorial tool for the ONT55 series Fiber Microscope, It mainly used for fiber end-face besmirch cleaning. 

It can be used for PC, APC (female) end-face cleaning inside 2.5mm, 1.25mm deep aperture. 

When do cleaning, press the ON/OFF button for 3 seconds can finish the cleaning.

Cleaning Materials Introduction

2.5mm Cleaning Swab:500pcs/box

1.25mm Cleaning Swab: 300pcs/box

Note:

The cleaning times for each swab cannot be more than

10 times and each cleaning time cannot be more than 3 seconds