ISO 13485 Medical Psa Oxygen Plant Generator Hospital Oxygen Generators
| Min. Order: | 1 Set/Sets |
|---|---|
| Trade Term: | FOB,CIF,EXW |
| Payment Terms: | T/T |
| Supply Ability: | 1000 sets per month |
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Trading Company |
Product Detail
| Model No.: | WOG-00 |
|---|---|
| Means of Transport: | Ocean, Land |
| Output Type: | AC Three Phase |
| Brand Name: | wellcare |
| Speed: | 1000 rpm/minute |
| Frequency: | 50 HZ |
| Rated Power: | 1.5 KW |
| Rated Voltage: | 380 V |
| Rated Current: | 600 A |
| Specification: | Rolling type / Skid-Mounted |
| Trademark: | WELLCARE |
| Production Capacity: | 1500 Sets Per Month |
| Production Capacity: | 1000 sets per month |
| Packing: | bulk load / wooden box |
| Delivery Date: | 25 days |
Product Description
Specifications:
Two compression methods:
1)Internal compression air separation plants:
Air-Compressed-Pre-cooling-Purifier-Rectification-heart exchanger (low pressure liquid)-Liquid oxygen pump(pressurized liquid oxygen)-oxygen vaporizer - oxygen cylinders
2)External compression air separation plants:
Air-Compressed-Precooling-Purifier-Rectification-heart exchanger (low pressure gas)-oxygen storage-oxygen compressor(pressurized oxygen)-oxygen cylinders
The main technical specifications of internal compression
| Model contents | KZON- 50/50 | KZON- 80/80 | KZON- 100/100 | KDON- 180-20 | KDON- 300-50 | KDON- 350-80 | KDON- 500-150 | KDON- 800-200 | KDON- 1000-300 | |
| Gox flow | Nm³/h | 50 | 80 | 100 | 180 | 300 | 350 | 500 | 800 | 100 |
| Gox purity | %(O2) | ≥99.6 | ≥99.6 | ≥99.6 | ≥99.6 | ≥99.6 | ≥99.6 | ≥99.6 | ≥99.6 | ≥99.6 |
| Gan flow | Nm³/h | 50 | 80 | 100 | 20 | 50 | 80 | 150 | 200 | 300 |
| Gan purity | Ppm(O2) | ≤10 | ≤10 | ≤10 | ≤10 | ≤10 | ≤10 | ≤10 | ≤10 | ≤10 |
Operating pressure | Mpa
| 1.2 | 1.2 | 1.2 | 1 | 1 | 1 | 1 | 1 | 1 |
| Start-up time | hour | ≤12 | ≤12 | ≤12 | ≤10 | ≤10 | ≤8 | ≤8 | ≤8 | ≤8 |
Operating period | year | ≥1 | ≥1 | ≥1 | ≥1 | ≥1 | ≥1 | ≥2 | ≥2 | ≥2 |
Oxygen filling (or booster) with liquid pump.
The Plant uses normal temperature molecular sieve adsorption, medium pressure booster expansion reflux flow.
Raw air is sucked from the atmosphere,It is going through filter for removal of dust and mechanical impurities.,then it is compressed to a certain degree by single stage screw compressor,via end stage cooler, air pre-cooling system, the air is cooled to approx. 8ºC. After water separation moisture is separated in water separator and then it goes to purifier for removal of moisture, CO2, C2H2 and hydrogen dioxide.
Then most part of air enters main heat exchanger to be cooled to saturated tempt. and partly is liquefied to the lower part of lower column; another part of air is compressed to a certain degree through two stage compression booster, via end stage cooler enters into oxygen heat exchanger to be cooled to be near saturated temperature, then after throttle goes to lower column. Through lower column pre-distillation we can get enriched oxygen liquid air from the bottom of the column. After cooling through sub-cooler,after throttled it goes to the middle part of upper column as reflux liquid for rectification. WN is obtained from the top of lower column, after condensed through condenser-evaporator, a part of WN is used as rectification reflux liquid for lower column; another part after cooling through sub-cooler and after throttling goes to the top of upper column as rectification reflux liquid. Pure liquid oxygen is obtained from the bottom of upper column, and it is condensed by condenser-evaporator. Liquid oxygen is abstracted from the bottom after cooling through sub-cooler, then it goes to LOX pump to be pressurized. It is evaporated in O2 heat exchanger and is reheated to normal tempt and then directly goes to oxygen filling ramp for filling of cylinders.
WN from the top of upper column goes through sub-cooler, the ower part of main heat exchanger to be reheated to a certain tempt. Then it goes to expansion turbine to create cold and returns to sub-cooler and main heat exchanger again to be reheated to normal tempt. A part of it passes to purifier as regenerating gas resource and another part goes to be vented partly.