Light Gauge Cut to Length Line

The light gauge cut to length production line is applicable for the material cold rolled carbon steel, galvanized steel pre-painted steel, stainless steel etc. For thickness less than 3.2mm, and variable width 1250mm/1300mm, 1500mm/1600mm, 1800mm and 2000mm. 

It is mainly composed of the decoiler, pinch roll and leveler, length controller, shearer and stacker etc., accompany of the feeder, side guider, conveyor etc.  

For the leveling machine in this cutting line, it has 4-HI type and 6-HI type for option. And usually 6-HI leveler is used for stainless steel to prevent the mark or higher request products.

The whole steel coil production line (shearing line) takes the centralized control with touch screen, PLC and AC frequency conversion & servo control for the whole line. The shearing length, quantity can be set, it takes auto measuring and shearing control. The working methods are of manual, automatic. When it works automatically, the computer controls the whole process of leveling & shearing to compensate the error.

Our RTQC High Speed Metal Coil Cut to Length Machine with the max. speed is 0~120m/min.

Advantages

v  Each part working is controlled by PLC with high automaticity and good reliability.

v  The shearing length and quantity is measured and displayed automatically.

v  It has the function of emergency stop and alarm if any accident.

v  The servo feeding and measuring with closed-loop detection and control.

v  All the steel welded work-piece are tempering by the large tempering furnace to relief stress after welding.

v  Latest technology design for leveling machine, whole machine has a higher strength.

v  High speed shear is adopted for high production.

v  Flying shear (tracking cutting) can be used according to request (optional).