XIANCE-XCA10.5-2000K loadbank medium voltage generator set intelligent test system

XIANCE XCA10.5-2000K medium voltage generator set intelligent test system

It adopts fin-type power consumption resistance, Siemens PLC control and comprehensive alarm system, which can effectively carry out load test on 10kv medium voltage. Its characteristics are that it is practical, convenient and flexible, low thermal power density, and safety-oriented.

Parameters of XCA10-2000K medium voltage generator set intelligent test system

Rated voltage/frequency AC three-phase four-wire 10500V/50Hz

Maximum load power Resistive load: 2000kW

Load classification Resistive load: divided into 5 grades, 200, 450, 450, 450, 450kW

Power factor 1

Load accuracy (per gear) ±5%

Load accuracy (whole machine) ±3%

Display accuracy 0.5 class

Control power supply External AC three-phase four-wire 380V/50Hz

Wiring method Load power input - copper bar (star connection)

Control Power Input - Terminal Block

Communication interface RS485, RS232

Insulation class F class

Maximum protection class IP54

Working way Continuous work

Cooling method Forced air cooling, side inlet air, upper air outlet

Chassis Construction Containerized with ladder access to the top, air inlet and outlet with grille and protective door

Transport Lifting, there are load-bearing rings on the top of the chassis

Chassis color gray (RAL7035)

Chassis size about 6058mm × 2350 mm × 2591mm (length × width × height)

Weight about 6000kg

Working environment parameters

Working temperature -10℃～+50℃

Relative humidity ≤95%

Altitude ≤2500m

Atmospheric pressure 86～106kPa

Covers an area of about 14.77 square meters

The ground load-bearing requirement is about 406 kg/square meter on average

Ventilation distance The air inlet is required to be 3 to 5 meters free of obstacles

The air outlet is more than 3 meters away from the roof or other obstacles

Reserved distance To facilitate entry, there should be no obstacles 3 meters in front of the control room

There should be no obstacles 2 meters in front of the maintenance room

Safe working distance There should be an isolation fence 1 meter away from the load cabinet

When the load cabinet is working, there should be no staff within 3-5 meters

Test cable requirements The current through each phase of the test cable between the generator set and the load cabinet is about 110A

Main component brands

Contactor Sunlight

Fuse Chuantai

PLC Siemens