Non-Combustibility Tester

INTRODUCTION:

The EN ISO 1182 Non-combustibility test is one of the series of Euroclass test standards. This test specifies a procedure for determining whether or not a material will contribute directly to fire development and is relevant to classification of all building products (including floorings) into classes A1 and A2.

FEATURE:

• Non-Combustibility Furnace measures incombustibility and combustibility of uniform building material and non-uniform building material of actual element.

• The evaluations (results) are rising temperature in the furnace, basic mass loss and ignition of specimen.

• Single Zone Furnace operable at up to 900 ℃ with the Kanthal Ribbon Heater.

• 750±5℃ temperature automatically control by PID and Power controller.

• Provided with stabilized voltage supply for more quick temperature stabilization.

• Equipped with 3 thermocouples, for temperature in furnace, specimen center, and specimen surface respectively.

• 360 degree rotatable and height adjustable thermocouple scanning device.

• Inner furnace thermocouple device to calibrate the temperature of furnace.

• Testing results include Mass Loss(g) and Rate(%) ,Ignition Time(s) and Sustained Flaming(s) ,Initial & Maximum Furnace Temperature(℃) ,Final Furnace Temperature(℃) ,Maximum Specimen Center Temperature(℃) ,Final Specimen Center Temperature(℃) ,Furnace Temperature Rise(℃) ,Specimen Center & Surface Temperature Rise(℃).




Installation requirements


Electrical	110V AC 60Hz / 230V AC 50Hz, 10A
Ambient Temperature	10°C to 35°C
Dimensions	400 mm (W) x 400 mm (D) x 1200 mm (H)
Control Unit	530 mm (W) × 270 mm (D) × 280 mm (H)
Weight	65KG
Applicable standards	EN ISO 1182,IMO FTPC Part 1,BS 476-4,EN 13501