Transformer On-Load Tap-Changer Tester

Product Introduction

The on-load tap changer is the only moving part connected with the transformer circuit so more and more attention has been paid to the detection of the on-load tap changer.In the electrical equipment handover and preventive test regulations it is required to check the action sequence of on-load tap changer measure switching time etc.This device is mainly used for measuring the transition waveform transition time transient resistance of transformer on-load tap changer three-phase synchronism etc.

product names:On - load tap - changer tester transformer on - load tap - changer tester transformer on - load switch tester

Product Characteristics

• 1,Instrument output current light weight

• 2,Two current output wider test range higher stability

• 3,It can calculate the transition resistance value and transition time value automatically

• 4,Has the perfect protection circuit the reliability is strong

• 5,5.7 "large LCD display easy to operate on site

• 6,With usb flash disk storage function you can store more data waveform

• 7,The keyboard and the one-key flying shuttle operate independently making the instrument operate more quickly and conveniently
  
  

•    Product Parameters




Technical parameters

The output current		1.0A,0.5A
Measuring range	Transition resistance	0.5Ω～20Ω(1.0A),0.5Ω～40Ω(0.5A)
	Transition time	0～250ms
Accuracy of measurement	Transition resistance	±(5% reading +3 words)
	Transition time	±(0.1% reading +3 characters)
The environment temperature		-10℃～50℃
Environmental humidity		≤85%RH
Working power supply		AC220V±10%
Power frequency		50±1Hz
storage		U disk storage local storage
Overall dimensions		345mm×295mm×175mm
Instrument weight		5kg