Advanced Wax Injection Machine

SANEI CASTING - JAPANESE TECHNOLOGY

Sanei Vacuum Wax Injector (Advance)

Auto Clamp Features:

A. X Axis: Automatic alignment function for left and right slight adjustment, which is very convenient for alignment and improves production efficiency greatly;

B. Z Axis: Pioneering automatic alignment function on up and down slight adjustment in Jewelry industry, the operator does not need to adjust the clamp height one by one when they continuously make different thickness rubber mould. This function may reduce the labor of the operator, lower the air leakage and wax leakage and improve production efficiency greatly.

Features of this Advance model digital vacuum wax injection machine:

A. Upgraded clamp unit with extra function: automatic alignment function on up and down slight adjustment aiming at wax injecting nozzle.

B. Pioneering and Innovative wax injecting nozzle mirror makes a more direct observation of alignment of wax injecting nozzle and rubber mould in Jewelry industry.

C. Fully upgraded clamp unit allows a wider range of application than previous generation of rubber mould.

D. The position of the clamp cylinder is adjustable freely according to rubber mould's center of force.

E. Pioneering and Innovative front hanging clamp unit in Jewellery industry, standard clamp unit and large clamp unit can be switchable quickly on the same wax injector.

F. The clamp unit adds a rapid lifting structure. The operator does not need any tools when processing different thickness rubber mould in the same wax injector machine. Two fingers are enough to position the wax injecting nozzle and the mouth of rubber mould into perfect match easily, conveniently and accurately.

G. Temperature, timing and pressure are controlled by digital circuit,the precision is more accurate than anolog logic circuit.

Wax Injector Specifications

Power Supply: Single Phase, AC 100-220V±10%,50/60Hz

Rated Power: 500W

Temperature Display Range: 40.0～99.9℃ (104～212℉ )

Temperature Setting Range: 40.0～90.0℃ (104～194℉ )

Temperature Accuracy: ±0.5℃

Vacuum Timing Setting Range: 0～99.9(S)

Wax Injection Timing Setting Range: 0.1～600(S)

Time Accuracy: 0.1S

Timing for Heating: 0～99H

Wax Tank Volume: ~3KG

Pressure Gauge Range: 0～0.25MPa (0～2.5Kg/cm²)

Fuse Rated Current: 5A

Packing Size: L 532 x W 382 x D 565 mm

Net Weight: 21.5KG

Auto Clamp Unit Specifications

External Pressure Input: 0.4～0.7MPa

Pressure Regulating Valve Pressure Range: 0.25～0.3MPa

Pressure Sensor Display Range: - 5～240KPa

Primary Wax Injection Pressure Setting Range: 10～220Kpa

Secondary Wax Injection Pressure Setting Range: 10～220Kpa

Secondary Wax Injection Start Time　Setting Range: 0～99.9(S)

Clamp Pressure Setting Range: 30～235Kpa

Forward Pressure Setting Range: 65～235Kpa

Clamp Hold Time Setting: 0～300(S)

Max Pieces Counting: 0～9999

Data Storage: 10,000

Starting Mode: Magnetic Induction or Press Button

Rubber mould Size (Standard): L 135 x W 105 x D 45 (max)

Rubber mould Size (Large): L 135 x W 135 x D 60 (max)

Packing Size: L 543 x W 278 x D 540　mm

Net Weight:  12KG