Parker PV series axial piston pump hydraulic pump
| Min. Order: | 1 Piece/Pieces |
|---|---|
| Trade Term: | FOB,CIF |
| Payment Terms: | Paypal, L/C, T/T, WU |
| Place of Origin: | Guangdong |
Company Profile
| Location: | Guangzhou, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Trading Company, Service, Other |
Product Detail
| Means of Transport: | Ocean, Air, Land |
|---|---|
| Brand Name: | Parker |
| Packing: | Standard Export Wooden Case |
Product Description
| series | PV series axial piston pump | |
| Specifications | PV016, PV020, PV023, PV032, PV040, PV046, PV063, PV080, PV092, PV140, PV180, PV270... | |
| Working pressure | Rated pressure 35 MPa, peak pressure 42 MPa | |
| Control mode: | Characteristic | Installation conforms to standard VDMA-24560 |
| With standard pressure regulator | Standard Installation Form: IS0 3019/24 Hole Flange (metric) | |
| With power regulator | Optional Installation Form: IS0 3019/14 Hole Flange (SAE) | |
| Large variable control piston with strong reset spring, fast response. | ||
| Because the compensating system has abundant pressure release function, the peak pressure at zero flow rate is reduced. | ||
| The minimum compensation pressure is 12-15 bar. | ||
| plunger design and new technology of pre-compression volume are adopted to reduce flow fluctuation to the lowest level ever. | ||
| Strong and FEM-optimized pump body structure reduces the complete variable control type of noise level | ||
| 100% nominal torque through-shaft transmission structure | ||
| Pumps of the same specification, type and almost all of the same metric or SAE flanges can be assembled. | ||
| Model | 16 | 20 | 23 | 32 | 40 | 46 | 63 | 80 | 92 | 140 | 180 | 270 |
| Flow (when speed1500rpm) (l/min) | 24 | 30 | 34.5 | 48 | 60 | 69 | 94.5 | 120 | 138 | 210 | 270 | 405 |
| Full Flow (when speed1500rpm~350bar)(KW) | 15.5 | 19.5 | 22.5 | 31 | 39 | 45 | 61.5 | 78 | 89.5 | 136 | 175 | 263 |
| Rated pressure (bar) | 350 | 350 | 350 | 350 | 350 | 350 | 350 | 350 | 350 | 350 | 350 | 350 |
| Maximum pressure (bar) | 420 | 420 | 420 | 420 | 420 | 420 | 420 | 420 | 420 | 420 | 420 | 420 |
| Maximun Speed (rpm) | 2750 | 2750 | 2750 | 2400 | 2400 | 2400 | 2100 | 2000 | 1900 | 1800 | 1800 | 1800 |
| Inlet pressure | 0.8~16 bar | 0.8~16 bar | 0.8~16 bar | 0.8~16 bar | 0.8~16 bar | 0.8~16 bar | 0.8~16 bar | 0.8~16 bar | 0.8~16 bar | 0.8~16 bar | 0.8~16 bar | 0.8~16 bar |
| Weight (kg) | 19 | 19 | 19 | 30 | 30 | 30 | 60 | 60 | 60 | 90 | 90 | 172 |
This type of hydraulic pump is an inclined disk type axial piston hydraulic pump driven by a through shaft in an open loop. It can be used in combination of single pump and multiple pumps.
Hydraulic oil recommendation
It is recommended to use high quality mineral oil-based hydraulic oils, such as HLP oils that meet the requirements of Part 2 of DIN 51524. For general use, Brugger value must be greater than 30N/mm2; for heavy-duty hydraulic equipment and fast circulation and/or hydraulic systems with heavy-duty dynamic load, Brugger value must be greater than 50N/mm2, and Brugger value should be measured in accordance with DIN 51347-2. Details can be found in document HY30-3248/UK, Hydraulic Oil for Parker PV Series Axial Piston Pumps.
viscosity
In normal operation, the range of oil viscosity should be 16 to 100 mm2/s (cSt), and the maximum allowable viscosity at start-up should be 800 mm2/s (cSt).
Filtration requirements
In order to maximize the function and prolong the service life of the hydraulic pump and other hydraulic components in the system, effective filtering measures should be taken to protect the system from pollution. The cleanliness of oil is assessed according to ISO 4406:1999 solid particle contamination grade, and the oil is filtered and purified by filters. The quality of filter element should conform to the relevant standards of ISO. For general hydraulic systems, the oil contamination level required to ensure their satisfactory operation is not higher than the 20/18/15 stipulated in ISO 4406:1999. If long service life of hydraulic components is required, the oil contamination level shall not be higher than 18/16/13 stipulated in ISO 4406:1999.
Sealing element
Check the technical conditions of hydraulic fluid and its chemical compatibility with sealing materials. Check the applicable temperature range of sealing material and compare it with the temperature range of system operation and environment. N - butadiene rubber - 40... + 90 C note: The highest oil temperature will appear at the outlet of the hydraulic pump, which is 25 C higher than that of the tank.
Technical advantages:
PV is a solid design that provides reliable loops for the most demanding applications
Compact structure and service-friendly design
Flexible installation interface
low noise
high efficiency
Low power consumption and reduce heat
Simple hydraulic control with "No leakage" adjustment
Full-power through-shaft drive capability
High self-suction speed capability of 350 bar
The fem-optimized housing and precompression chamber have low output pulsations and low noise
Modular compensator with fast response
Total shaft drive torque 100% nominal torque