Pipe Making Machine Welded Steel Tube Mill Manufacturer
Tube Mill, Pipe Mill, Pipe Making Machine, Tube Forming Machine, ERW Tube Mill, Square Tube Mill, API Pipe Line, Slitting Line, Cut-to-length Line
I. The technical flow of the production line
{SteelTape} → Hydraulic Single Mandrel Uncloier → Automatic Butt Shear & Welder →Spiral Accumulator → Forming section(Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)→Remove inner burr device → Zinc Patching→Cooling unit → Sizing Section and straightener → Cutting Saw → Run-out table
II. Basic conditions:
1. Production Capacity |
Round Pipe | 38mm - 127mm |
Square & Rectangular | 30*30 - 100*100(120*80)mm |
Wall Thickness | 1.0 - 4.0mm (Round Pipe); 1.0 - 3.0mm(Square Pipe) |
Speed | Max.80mm |
Pipe Length | 6m - 12m |
2.Steel Strip Specification |
Material | Low Carbon Steel,Q345, Q235, Q195 |
Coil I.D. | 460 - 510MM |
Coil O.D. | Max. 1800mm |
Strip Width | 120mm - 400mm |
Strip Thickness | 1.0mm - 4.0mm |
Max. Weight | 4000kgs |
3. Electricity |
Dynamic power: | 380V, 3 phases, 50Hz (Depending On Local) |
Control Power: | 220V, one phase, 50 Hz |
4. Solid State High Frequency Welder: 300Kw |
5. Electric installed capacity: Approx. 600KW |
6. Cooling Water |
Reservoir for High Frequency equipment: | 30m³, one set |
Reservoir for circulating cooling water: | 30m³, one set |
7. Compressed Air |
Pressure | 0.5MPA |
Flow | 0.8m3/hour |
8. Line Speed: Max.80m/min |
9. Size of Whole Line: 70m X 6m (Length X Width) |
We always design and make each line according to each customer's specific requirements, so each customer can buy his own well-content line from us.
For more information, please send us inquiry.
Contact: Ms. Angie Chen
Email: angie(at)erwtubemills(dot)com
Mobile/ Wechat/ Whatsapp: 0086-15631120280