Heat pipe pressurized solar water heater 150L12tubes-GL model(25degree)

Heat pipe pressurized solar water heater features

1.Adopts the best conduction performance metal- heat pipe (copper).
2.Can be used all year round in the cold climate.
3.High  efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot  energy to cold water in pressurized solar water heater tank rapidly.
4.The  whole pressure of the system is up to 1.5kg/M2, the inlet could connect  the tap water directly, the max pressure can be 0.6Mpa.
5.No water in the tube, one tube broken don't influence the system working.
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage.
7.Dual-purpose brackets for both flat and inclined roof.

8.The  system is pressurized, it keep a constant temperature of water in the  tank, avoid the problem came from water level controller malfunction  which could cause water flow out.

Pressurized solar water heater working principle

1.The  pressurized solar water heater tank has no exhaust hole, therefore, it  must bear the pressure came from tap water. The hot water comes out  because of water pressure.

2.Vacuum  tube absorbs solar energy, and conductive copper pipe transfers the  heat into the pressurized solar water heater tank. In this case, the  water inside the tank becomes hot.

3.No water in the heat pipe makes the whole system could bear pressure.