Cbn Cam Shaft Grinding Wheel

CBN Wheel For Camshaft Grinding

Use CBN wheel non-circular grinding CAM, camshaft, CAM piece and pump ring

It is obvious from the example of camshaft that non-circular parts must be processed in the manufacturing process.

Unlike circular grinding, which is perfectly circular, non-circular grinding must be made into a defined non-circular shape and finished by grinding process.

Non-circular shaft components include camshaft, CAM disk and pump shaft.

Different manufacturing tasks also have different requirements for machine tool configuration.

But even for a narrow range of processing tasks, such as the grinding of car camshafts, a single machine tool configuration cannot meet the market's demands.

Therefore, modular machine tools and technological concepts are essential for non-circular machining.

It may also be necessary to use multiple grinding spindles for rough and finishing or complete machining, such as a double slide grinder for simultaneous or synchronous support grinding.

CBN grinding technology for non-circular machining

CBN is the most advanced technology in the field of non-circular grinding.

In the future, productivity will be increased by further increasing cutting speed.

For parts, such as compound camshaft, which have lower grinding allowance and higher instability, a grinding system with significantly reduced grinding force must be developed.

The increasing and changing market demands will also be the driving force for innovation in the field of non-circular grinding technology in the future.

In order to meet the different requirements of grinding machine and machining process, emark provides a variety of modular systems consisting of process modules and machine tools, which you can adjust flexibly according to the corresponding production conditions (see below).

The sample application

Camshaft machining is a typical example of non-circular grinding.

For example, in a completed turnkey project, four double cams are ground by manual feeding.

The challenge of this operation to the grinding technique is: up to 3 mm margin in rough machining, and only use a grinding tool for finishing.

These seemingly contradictory requirements can be met by a ceramic CBN grinding wheel.

Another example is the complete processing of the truck camshaft: twelve distribution cams, six pump cams, seven journal supports, thrust bearings and tapered shaft ends and shoulder are processed in a single clamp.

As the inherent stress is often released during grinding of hardened bearings and CAM grinding affects the diameter jump of the journal support, it is not possible to process the bearings in a single process according to the drawing.

To achieve the required quality, processing in a single clip is usually the best approach.

vitrified bond CBN grinding wheels for crankshaft and camshaft 

vitrified bond CBN grinding wheel is suitable for high-efficient heavy grinding of crankshaft and camshaft of automobile parts. The wheel speed is 80m/s--120m/s. Designed to be used on crank and cam CNC grinders like Toyoda, Schaudt, Landis, junker.

Workpieces:

Cast iron series( such as cold cast iron,nodular cast iron,grey cast iron,lly Castiron) and steel series (such as 20Cr,GCr15,CF53,#45,#55,80B).

Application Of Vitrified CBN Grinding Wheel For Camshaft:

ceramic bond CBN wheel used in processing iron, steel and ferrous metal materials, can coarse, prcision, fine  Finishing,

 for high fficient and heavy grinding ofcrankshaft and camshaft of Automobile,Trackor,Transport.

The Specifications Of Vitrified CBN Grinding Wheel For Camshaft:

Features:high fficiencny and precision without burning and annaling,easy to dress an durability.

 Machines:Junker,Toyoda scuaudt, EMAG,LANDIS.

Automobile engine crankshaft grinding application project and technical parameters

The following is a machining case for crankshaft grinding

The above is the relevant case and information of the crankshaft grinding CBN ceramic grinding wheel processing crankshaft from More super hard comapny.

This specification model can be customized high precision grinding crankshaft CBN grinding wheel, also can be stator grinding camshaft CBN grinding wheel.