Min. Order: | 10 Piece/Pieces |
---|---|
Payment Terms: | L/C, D/P, D/A, T/T |
Supply Ability: | 1000 Piece/Pieces per Month |
Place of Origin: | Shandong |
Location: | Dongying, Shandong, China (Mainland) |
---|---|
Business Type: | Manufacturer, Trading Company |
Brand Name: | CNPS |
---|---|
Production Capacity: | 1000 Piece/Pieces per Month |
Packing: | paper box |
Specification
Setting Information | |
Density(g.cm-3) | 3.67 |
Radiation length(cm) | 2.59 |
Decay constant(us) | 0.23us |
Emission peak(nm) | 415 |
Light yield(%NaI:Tl) | 100 |
Melting point(°C) | 651 |
Hardness(Mho) | 2 |
refractive Index | 1.85 |
Hygroscopicity | Strongly |
Cleavage | -100 |
Product Description
NaI(Tl) is a kind of scintillation crystal with good properties. Single crystal NaI(Tl) is grown from pure NaI raw material doped with TlI. Its emission maximum is 415nm, which is well matched to the sensitivity curve of photomultiplier tubes (PMTs) with bialkali photocathodes.
The material has a very high luminescence efficiency, and exhibits no significant self absorption of the scintillation light and has good resolution ability to X-ray and γ-ray.
Press-forged NaI(Tl) crystal is derived from a unique manufacturing process in which single crystal ingots are recrystallized under heat and pressure. The characteristic improves mechanical strength but has no effect on the scintillation performance.
So it is widely recognized as suitable alternatives to single crystal scintillators in those applications where thermal and mechanical shock are encountered. Another feature of pressforged NaI(Tl) is the possibility to manufacture complicated detector geometries directly without extensive machining.
Relative light output(%) | 100 | Melting point(℃) | 651 |
Mohs hardness | 2.1 | Thermal expansion coefficient | 47.4 x 10-6 K-1 |
Cleavage plane | (100) | Light yield | 38x103Photons/MeVγ |
Wavelength of emission maximum(nm) | 415 | Primary decay constant(ns) | 250 |
Density(g/cm3) | 3.67 | Refractive index | 1.85 |
Hygroscopicity | yes | Afterglow | 0.3-0.5%@6mms |
Installation Process
Pay attention to the light handling when installing, to avoid vibration; the temperature difference of the storage environment should not be too large, the air humidity should not be too large
Applications
NaI(Tl) crystal can measuring the natural radioactivity of the earth. The gamma photons interact with NaI(Tl) crystal to produce photons of light scintillations. This information is used by geologists to determine the location and composition of minerals, and to look for oil and gas.NaI(Tl) crystal with high light yield
It has become the preferred material for oil well logging detector. We provided highquality NaI(Tl) crystal in Daqing Oilfield, Dagang Oilfield, etc.
NaI(Tl) crystal can measuring the natural radioactivity of the earth. The gamma photons interact with NaI(Tl) crystal to
produce photons of light scintillations. This information is used by geologists to determine the location and composition of
minerals, and to look for oil and gas.NaI(Tl) crystal with high light yield, it is affected by temperature is relatively small.It
has become the preferred material for oil well logging detector. We provided highquality NaI(Tl) crystal in Daqing Oilfield,
Dagang Oilfield, etc.
High temperature NaI(Tl) crystal
Operating Temperature 25°C to 175°C‚High temperature ruggedized NaI(Tl)crystal
Vibration 20g,20-1000Hz
Shock 400g@1ms
Now radioactive materials are routinely present in environments, the measurement
of ionizing radiation is critical to ensure the safety and protection of workers and the
general public from potential hazards. NaI(Tl) crystal can be used to monitor production,
life,work environment,field and so on.
Nuclear Medicine is a medical specialty that uses safe, painless and costeffective techniques to image the body and
treat disease. NaI(Tl) medical detectors are widely used in γ camera, isotope therapy and other diagnostic devices.
NaI(Tl) crystal used to inspect the rate of flow of molten steel ,thickness of the steel and defect inspection in
metallurgical industry, also inspect concealed explosives.
Certifications
Company Information
FAQ
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
A: Low MOQ, 1pc for sample checking is available
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
A: Yes, we offer 2-5 years warranty to our products.
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.