Pepperl+Fuchs P+F encoder RVI58N Series proximity switch bus connector

Pepperl+Fuchs P+F encoder RVI58N-011K1R61N-01024 Series proximity switch bus connector

Pepperl+Fuchs Encoder

In this configuration, the gear structure is added to the single-turn code disc. With these interconnected gears, we can measure up to 16,384 turns (14-bit), so that the encoder has a total accuracy of 16 bits (single turn) ) plus 14 bits (turns), or a total precision of 30 bits. Due to the large number of measurement steps (approximately 100 million), this type of encoder is capable of splitting a very long linear distance into very small measurement steps.

Average time to failure (days): 150 a

Service life (...month...day): 20 a

L10h 1,9 E+11 Not greater than speed 6000 rpm Not greater than 20/40 N Axial/radial Axle load

Operating voltage: 4.5-30 VDC (SSI, SSI + RS422)

10-30 VDC (SSI + push-pull)

No-load current: up to 180 mA

Power-on stable delay: < 250 ms

Linear: 16 bits ± 2 LSB, 13 bits ± 1 LSB, 12 bits ± 0.5 LSB

Output code: Gray code, binary code

Counting direction: clockwise decreasing (homeopath rotation direction, code value decreasing)

Interface type: SSI; SSI + incremental track

Monostable trigger time: 20±10 ?s

Resolution:

Single turn: up to 16 Bit

Multiple circles: 14 Bit

Total resolution: up to 30 Bit

Transmission rate: 0, 1-2 MBit/s

Voltage drop: Ue-2, 5 V

Meet the standard: RS 422

Input type: Counting direction selection (V/R)

Signal voltage:

High: 4,5-30 V (SSI, SSI + RS422)

10-30 V (SSI + push-pull)

Low: 0-2 V

Pepperl+Fuchs P+F encoder RVI58N-011K1R61N-01024 Series proximity switch bus connector

Input current: < 6 mA

On-delay: < 10 ms

Output type: RS422, push-pull

Signal output: A+B+/A+/B

Pulse: 1024, 2048, 4096

Connector: 9416, 12-pin; 9416L, 12-pin

Cable: ?7 mm, 6 x 2 x 0.14 mm2, 1 m

Degree of protection: DIN EN 60529, IP65 (without shaft seal); DIN EN 60529, IP66/IP67 (with shaft seal)

Climatic conditions: DIN EN 60068-2-3, no condensation

Radiated interference: DIN EN 61000-6-4

Anti-jamming: DIN EN 61000-6-2

Impact resistance: DIN EN 60068-2-27, 100 g, 6 ms

Vibration resistance: DIN EN 60068-2-6, 20 g, 10-2000 Hz

UL certification: cULus certified, universal, Class 2 power supply

Working temperature: -40-85 ° C (-40-185 °F)

Storage temperature: -40-85 ° C (-40-185 °F)

Material: Combination 1: Housing: Aluminum powder coating; Flange: Aluminum; Shaft: Stainless steel

Combination 2 (antioxidant type): Housing: stainless steel, flange: stainless steel, shaft: stainless steel

Weight: 800g or so

Rotation speed: up to 12000 min -1

Instantaneous inertia: 50 gcm2

Starting torque: < 5 Ncm

Shaft load: axial 40 N

Radial 110 N

1 P+F bus connector V1-W-BK

2 P+F encoder RVI50N-09BK0A3TN-01000

3 P+F sensor NBB2-12GM50-A2-V1

4 P+F safety barrier KCD2-STC-EX1

5 P+F safety barrier KCD2-SCD-EX1

6 P+F sensor NBB4-12GM50-E2-V1

7 P+F sensor V1-W-5M-PVC

8 P+F sensor UB1000-18GM75-U-V15

9 P+F Inductive Positioning Measurement System PMI PMI120-F90-IU-V1

10 P+F cable V15-G-2M-PVC

11 P+F proximity switch NBN40-L2-E2-V1

12 P+F NJ2-12GM40-E2-V1

13 P+F NCB4-12GM40-N0

14 P+F encoder RHI58N-0BAK1R61N-1024

15 P+F coupling 9401 12*12

16 P+F proximity switch NBB8-18GM50-E2-V1

17 P+F sensor UC2000-30GM-IUR2-V15

18 P+F encoder RVI58N-011K1R61N-01024

19 P+F domestic coupling 9401 10*10

20 P+F UC500-30GM-IUR2-V15

21 P+F RHI90N-0HAK1R61N-01024

22 P+F NBB15-30GM50-E2