Jinhong mold components early ejector return assembly ER

Jinhong  mold components early ejector return assembly ER Product features:

• 1.This device is used to completely reset the ejector plate before mould clamping to prevent mould damage;

• 2.This mechanism is internally installed, having a small installation space; even if the ejection stroke of the ejector is large, it can realize the early return completely;

• 3.This mechanism is internally installed, avoiding conflict with the external parts of the mould and the waterways.

• Installation and use instructions:

• 1.Calculate the stroke precisely, and adjust the reset stroke by intercepting the length of the straight ejector sleeve and the reset rod (as shown in the figure below);

• 2.Machine the mounting holes according to the deepening dimension drawing; note that all mounting holes are concentric and perpendicular to the mould joint;

• 3.It is necessary to use two or more push plate reset mechanisms for each mould and symmetrically install them;

• 4.If they are not installed symmetrically, a single reset mechanism will be under stress and the component may be broken due to unbalanced stress;

• 5.Add lubricating oil to the fitting part regularly;

• 6.Ensure that the reset push rod is accurately installed in the front end of the straight ejector sleeve. If it is misplaced, the mould will be damaged.

• 7.Conduct the fit function test to check whether the parts of the mechanism are smooth and the stroke is consistent.