Q35Y Series Steel hydraulic iron worker machine

Hydraulic 66-200ton double cylinder ironworker

1. Introduction:

H(Q35Y) series industrial-grade hydraulic ironworker is a combined punching and shearing machine, featuring multiple functions, including: punch all kinds of holes (round, square, oblong hole), louver punch, angle steel shear, flat steel shear, profile steel shear(channel, I-beam, round/square bar, T-bar shear), notch, V-notch, bending, angle bending. We can design any special tools according to your metal fabricating requirements. 

It is widely used in steel structure, high voltage tower, telecommunication tower, large rigid frame bridge, military and air craft and other metal fabricating industries. Standard equipped with quick-change coupling nut & sleeve, squaring arm with scale, electronic back gauge, gauging table with stops, punching base table, safety guards and more.

2. Optional configuration:  

Automatic Holding System: The automatic holding system can be chosen to set up in angle steel shearing and plate shearing work position. Additionally, the holders will fix the position of work piece in order to save time and improve working efficiency.  

Temperature cooling system: When the machine is working, you can read the temperature of oil through the monitoring screen. If the oil temperature goes higher than 55 degree which is the default configuration, the inside cooling system will run automatically to decrease oil temperature in order to protect hydraulic system.

Dual working system: At this condition, punching and shearing position can work synchronously, suitable for volume-production.

3. Machine Function:

Design and specifications subject to change without notice.

5. Main standard properties components:

1. CE certificate electrical parts

2. Professional design frame structures(steel frame Q235 = American standard steel A306 GR55)

3. Steel welds with high precision strength and rigidity to eliminate vibrations

4. Standard with a set of punch and die, four sets of blades

5. Timer relay by Japanese OMRON

6. All wiring terminal block by Germany WEIDMULLER

7. Main Electrical component by French Schneider

8. Oil seals by Japanese, NOK more durable

9. Hydraulic pump made by Taiwan

10. Hydraulic valve made by Beijing Huade

11. Motor by China Jiangsu Dazhong

12. Hydraulic fuel tanks and ironworker frame made by our Factory

13. Dual independent hydraulic cylinder                     

14. Dual foot switches controlled to work separately

15. Easy Adjustable stroke control with ruler

16. Indicator on both hydraulic cylinders

17. 1m electric back gauge auto stop

18. Moveable working light that can be placed at any desired position

19. Hydraulic system with overload protection system

20. Emergency safety stop switch

21. Large punching, notching, shearing table with ruler guide  

22. Machine is easy to maintain

6. Standard equipment:
1. A set of punch and die(round hole)  
2. A set of angle steel blade
3. A set of square and round bar blade
4. A set of shearing plate blade
5. A set of notching blade    
6. Bend mould 300*65*65mm for H-66, H-99, 300*95*95mm for H-120,H-165
7. Clamping cylinder
8. Quick change punch device
9. Φ51mm U type circle
10. 1000mm electrical back gauge
11. Dual foot switches
12. One working lamp
13. A set of Oil gun, hook spanner
14. A group of inner hexagon spanner, reserve sealing parts

7. Optional equipment:
1. Square, oval, louver punch and die
2. Channel shear and I-beam shear
3. Conveyor table
4. Longer worktable
5. Worktable with linear guide
6. Φ20, 32, 60mm U type circle

A Special order for the joist and channel moulds needed.