40" PP Melt Blown Filter Cartridge Water Filter
Product Description
High Flow Cartridge has a 6inch/152mm large diameter, and is coreless, single open-ended with an inside to outside flow pattern. The large diameter with big filter area insures to reduce the number of filter cartridges and the dimension of housing required. The long service life and high flow rate result in low investment and less manpower in many applications.
Features
1.Gradient pore structure
2.Up to 70m3/h flow rate per filter cartridge for water filtration
3.Maximum 50% reduction of filter system
4.20inch/528mm, 40inch/1022mm and 60inch/1538mm lengths are available
5.All contaminants can be removed within the cartridge because of the flow direction
Applications
1.Prefiltration of RO, Pretreatment of sea water desalination
2.Condensate water filtration, hot water recovery in power generation
3.API, solvents, and water filtration in BioPharm market
4.Paints and coatings, Petrochemical, Refineries
5.Microelectronics, film, fiber and resin
Specification
3M
| Micron | 1μm,5μm,10μm,15μm,20μm,40μm,70μm,100μm |
| Cartridge Length: | 20" (508mm) /40" (1016mm)/60" (1524mm) |
| Cartridge Max.OD: | 6.5"(165mm)/6"(152mm) |
| Filter Medium: | Polypropylene , Cellulose , Melt Blown PP |
| Support: | Polypropylene |
| End Caps: | Glass Fiber Reinforced Polypropylene |
| O-ring Seal options: | EPDM,NBR,Viton |
| Polypropylene: | 3.44bar@82°C,50psi@180°F |
| Glass Fiber: | 3.44bar@121°C,50psi@180°F |
| Suggestion Flow: | 20" 660LPM |
| 40" 1300LPM |
| 60" 1900LPM |
Parker
| Micron | 1μm,5μm,10μm,15μm,20μm,40μm,70μm,100μm |
| Cartridge Length: | 40" (1016mm) |
| Cartridge Max.OD: | 6.0"(152mm) |
| Filter Medium: | Polypropylene , Cellulose , Melt Blown PP |
| Support: | Polypropylene |
| End Caps: | Glass Fiber Reinforced Polypropylene |
| O-ring Seal options: | EPDM,NBR,Viton, |
| Polypropylene: | 3.44bar@82°C,50psi@180°F |
| Glass Fiber: | 3.44bar@121°C,50psi@180°F |
| Suggestion Flow: | 40" 1300LPM |
PALL
| OD | 6" (152mm) |
| Length | 20"/40"/60" |
| Micron | 0.1um~100 um |
| Maximum operating temperature | Pleated/melt-blown pp: 82ºC |
| Pleated glass fiber: 121ºC |
| Maximum operating differential pressure | Pleated/melt-blown pp: 3.44bar@82ºC |
| Pleated glass fiber: 3.44bar@121ºC |
| Suggestion design flow | 40": ≤15m3/h |
| 60": ≤25m3/h |
