Technical Parameters:
Number of feeders:64 pieces
○Number of mounting head:6 heads
○Number of pallets:6 pieces○Average power:500W○positioning accuracy:0.01mm○Nozzle buffer range:4.5 mm○Power Supply:220V, 50Hz○Compressed air: 0.5-0.6Mpa○Drive motor: Panasonic servo motor /HW-QiGn stepper motor○Identification mode: six head synchronous identification
○Suction nozzle vacuum source:High speed on-off vacuum generator with vacuum destruction
○Maximum board area:625×455mm○XY maximum range of motion:629×679mm○Z axis maximum range:20mm○Belt feeder: 8, 12, 16, 24mm and vibration feeder (can be attached to the chip)
○Maximum theory speed: 15000 Pcs/ hours○LED, resistance capacitance actual patch speed: 12000 Pcs/ hours
○Hybrid visual mount average patch speed 8500Pcs/ hours
○XYZ drive rail: TBI high precision heavy duty linear guide rail.
○Motion drive system: Panasonic AC servo -A6 driver○Operating system: Based on the Windows operating system, China Weiguo record company independent research and development automatic placement machine operating system, support Windows XP, win7 operating system
○Component angle: 0-360 degrees at any angle, the movement of synchronous rotation○X/Y mode of operation: QiGn-2017 version of intelligent curve acceleration and deceleration linkage system
○MARK point positioning: automatic scanning (can be arbitrarily set MARK points)
○Intelligent alarm: automatic correction, Automatic patch, lack of material alarm
○Into the plate mode: single segment from left to right transmission, can be connected to the automatic connection platform system, automatic PCB transmission positioning. Thimble positioning, manual release plate.
○Visual display: 17 inch industrial control display ratio 4:3 resolution 1280x1024
○Programming mode: peer to Peer programming, visual programming, PCB file import, etc.
○Optimization mode: three automatic optimization modes (including V2017 intelligent optimization)
○To identify the number of cameras: a Mark recognition camera, six high speed identification camera, a high resolution precision recognition camera
○Applicable scope:adapt 0402, 0603, 0805, 1206, two tubes, transistors, SOT, and 40*40mm in the range of pin spacing is greater than or equal to 0.3mm (0.5mm from the QFP BGA pin center), etc..
○Product weight:500KG○Size (length and width): 1450*1370*1350mm (without display and keyboard
