Plasma Cutting Nozzle 969-95-24190 0.8mm For Komatsu Plasma Torch Nozzle Komatsu Parts

Plasma Nozzle 969-95-24920 1.6mm For Komatsu Plasma Torch Nozzle, Komatsu Parts

. HEC Brand

We make metal cutting system and plasma cutter as well as torch and consumables. We make plasma cutting machine and fiber laser cutting machine with high quality and reliablity.

2. Cut Performance

HEC plasma consumables use high quality material and standard process to make sure the highest quality. Our consumables cutting performance is as the same as orginial OEM manufactory.

3. Good Price

HEC plasma consumables are good quality with low price make customers best requirement and saving money.

4. Big Catagory

HEC sell all kinds of plasma consumables include Hypertherm, EASB, Kjellberg, Koike and also supply some torch.

FAQ:

Q1:Can I get a free samples to check the quality?

A:Sure,we can supply the free samples but you need bear the express cost by yourself.

Q2:Will I afford the carrier charge?

A:Yes,you will afford the express charge or your account is OK.

Q3:Can I add my trademark on my products?

A:Yes,we need your certificate of authorization.

Technical Support:

The maintenance of the plasma torch

1. to correctly install the torch

Correctly and carefully install the torch, and to ensure that all the parts fit together well, and ensures the cutting gas and shielding gas flow, before the installation will be all the components on a clean cloth, avoid dirt adhesion to components. In the "O" type ring with a little lubricant, "O" - shaped ring is appropriate, should not be more.

2. the wearing parts should be replaced in time before the complete damage.

Vulnerable parts are not used completely damaged after the replacement of, because of serious damage to the electrode, the nozzle and the eddy current ring will can not control the plasma arc, cutting torch damage easily. So for the first time found that the quality of cutting down, it should be timely inspection and replacement of wearing parts.

3. The connecting thread cleaning torch

In the replacement of wearing parts or daily maintenance inspection, must ensure that the torch of internal and external thread cleaning. If necessary, apply more than 98% of industrial alcohol cleaning or repair connection thread.

4 the contact surface of the cleaning electrode and the nozzle

Must ensure that the nozzle and electrode contact surface clean and free of oil, if the contact surface with dirt, the torch will not be able to normal working, should use such as hydrogen peroxide cleaning agent cleaning.

5 check cutting gas and protective gas

Check the flow and pressure of cutting gas and protecting gas every day, if the flow is not sufficient or leakage, should immediately stop the trouble.

6 avoid torch collision damage

In order to avoid cutting collision damage, should be properly programmed, the cutting speed limit to avoid walking. Install anti-collision device can effectively avoid the collision damage the cutting torch.