hypertherm retaining cap For Gouging Consumables Professional Powermax Accessories

220991 Nozzle For Gouging Consumables, Professional Powermax Accessories

Shanghai HengSheng  Welding & Cutting Technology is a professional manufacturer plasma consumables electrode, nozzle, shield, swirl ring, inner cap, retaining cap, water tube, torch body and so on.

Plasma cutting is a process that cuts through electrically conductive materials by means of an accelerated jet of hot plasma. Typical materials cut by this process include steel, aluminum, brass and copper though other conductive metals may be cut as well. Plasma cutting is often used in fabrication and welding shops, automotive repair and restoration, industrial construction, salvage and scrapping operations. Due to the high speed, precision cuts, combined with low cost of operation, plasma cutting sees a widespread usage from large scale industrial CNC applications down to small hobbyist shops.

1. Cut Performance

HEC plasma consumables use high quality material and standard process to make sure the highest quality. Our consumables cutting performance is as the same as orginial OEM manufactory.

2.HEC Brand

We make metal cutting system and plasma cutter as well as torch and consumables. We make plasma cutting machine and fiber laser cutting machine with high quality and reliablity.

3. Good Price

HEC plasma consumables are good quality with low price make customers best requirement and saving money.

4. Big Catagory

HEC sell all kinds of plasma consumables include Hypertherm, EASB, Kjellberg, Koike and also supply some torch.

Technical Support:

Method for prolonging the service life of the plasma wearing parts

apply the splash proof chemical coating on the protective cover

Splash proof chemical coating helps to reduce slag accumulation in the protection cover. But it must be removed from the protective cover on the cutting torch to splash paint coating.

10 remove protective cover on the slag

Frequently clear the torch on the protective cover in slag, otherwise this slag will cause heavy destructive plasma arc".

Discharge of residual gases in advanced torch 11 after the replacement of wearing parts

In replacement of wearing parts for a long time or stop, should discharge torch in the residual gas (2 ~ 3 minutes is appropriate) to ensure that the steam discharged from the torch.

To keep the 12 torch and wearing clean

In the cutting torch and wearing any stolen goods will seriously affect the function of plasma system. Replacement of wearing parts, to put it in a clean flannelette, and should always check the torch connecting thread, with hydrogen peroxide cleaning cleaning of the electrode contact surface and the nozzle.

1. clear air or oxygen nozzle oxides

When the air or oxygen is used as the plasma gas, the oxide is deposited in the nozzle, which can affect the cutting airflow and reduce the life of the wearing parts. Wipe clean with cloth inside the nozzle can eliminate the oxide.

2. using softened water injection (plasma torch with liquid cooling system)

Hard water can cause metal impurities deposited on the nozzle ring, which will affect the cutting air flow, thereby reducing the cutting quality and shorten the service life of wearing parts.

3. check air flow and coolant every day

Damage to the torch of the most common causes of the lack of coolant, which need to regularly check leading to the torch gas flow and pressure (air), check the coolant pressure (liquid), if it is found that the flow is not enough or leak, immediately stop and troubleshooting.